Filter
Top Products
24
MEMORIZING STATIONS (FRONT PANEL ONLY)
If you often listen to a particular radio station, it's convenient to have the receiver store the frequency for
easy recall. The STAV-3860 can memorize up to 30 stations, stored in three banks, or classes, (A,B and C)
of 10 stations each. When memorizing FM frequencies, the receiver also stores the MPX setting (auto
stereo or mono, see "MPX Mode" on page 23). The process for memorizing stations is only possible from
the controls on the front panel of the receiver.
SP
A
STEREO
TUNED
3 2 4
Tuning Directly to a Station
If you know the frequency of the station you want to listen to, simply enter the frequency using the
number buttons on the remote control. This function is not available using the front panel controls of the
receiver.
The receiver and the remote control must both be set to tuner mode for AM/FM station listening.
SP
A
STEREO
TUNED
CLASS
MPX
D. ACCESS
SOURCE
SOURCE SELECT
TAPE
CD
TUNER
CH
SELECT
FUNCTION
FL
DIMMER
RECEIVER
*&
&
#
#
@
@
EFFECT
ASMS
SEARCH
T.TONE
FM/AM
MUTING
VOLUME
DSP MODE
2
!
!
CHANNEL
LEVEL
DISC/STATION
$
$
DECK 1
DECK 2
TUNING
TUNING
1234
56
90
78
POWER
POWER
STAV-3860
AUDIO/VIDEO SYSTEM REMOTE
OSR
SORROUND
5
1
4
3
2
1, 3
1 Use the FUNCTION button to put the receiver in tuner mode.
On the receiver, press the FM/AM button to select the tuner
mode.
2 Press the TUNER button on the remote control to put it in tuner
mode.
3 Press the FM/AM button to select either FM or AM.
Each press switches the band between FM and AM (on the
front panel, use the FM/AM button).
4 Press D.ACCESS (DIRECT ACCESS).
5 Use the number buttons to enter the frequency of the radio
station.
Example:
To tune to 106.00 (FM), press 1 – 0 – 6 – 0 – 0
If you make a mistake while inputting the frequency, press the
D.ACCESS button twice to cancel the frequency and start
again.
1 Tune to a station you want to store.
See "Finding a Station" on page 23 and "Tuning Directly to a
Station."
2 Press MEMORY.
The display shows a blinking memory class.