Filter
Top Products
19
1 SOURCE (POWER) button
2 NUMBER/PLAYER COMMAND buttons
Use to select the radio frequency in tuner mode.
Also, you can use to contol RCA professional
series components like CD players, cassette decks,
etc. according to the comands printed above the
button (4, 3, 7, etc.) (see pages 24, 27–29).
3 D.ACCESS button
This button gives you direct access to radio
frequency input, allowing you to input a station
directly. In DVD mode this button brings you to
the top menu (see pages 24, 29).
4 T.TONE / FM/AM button
Use this button to hear a test tone from each
speaker in turn to set the relative speaker
volumes. Also switches the BAND in TUNER
mode (see pages 15, 23–24).
5 SURROUND button
Use this button to set up the surround sound
features of the STAV-3860. Use it to select the
type of center mode, turn on/off subwoofer
option and select delay time for each speaker, or
to start the process of setting the effect levels
(see pages 13, 15, 20, 22).
6 2 button
Use to select a Dolby Pro Logic mode. Also used
to access Test Tone (see pages 15, 20).
7 CH SELECT button
Used to start the process of setting the speaker
levels (see $ below) (see pages 15–16).
8 RECEIVER STANDBY/ON button
Use to switch the receiver between on and
standby modes.
9 FUNCTION button
Use select the playback or recording source.
0 SOURCE SELECT keys
Use to put the remote control (NOT the receiver)
in the stated mode.
For other equipment controls, see Controlling the
Rest of Your System starting on page 27.
- DISC/STATION +/– buttons
Use to select the station of memorized
frequencies (see pages 25, 27).
= CLASS button
Use to switch between the three banks (classes) of
station memories (see page 25).
~ 2 3 5∞ ( TUNING +/–) and
7(ENTER)buttons
Use these arrow buttons when setting up your
surround sound system (see pages 13–16). These
buttons are also used to control for deck 1 of a
double cassette deck player. The TUNING +/–
buttons can be used to find radio frequencies
(see pages 13, 14, 23).
! MPX button
Use to switch between auto stereo and mono
reception of FM broadcasts. If the signal is weak
then switching to MONO will improve the sound
quality (see page 23).
@ DSP MODE button
Use to switch between the various DSP modes
available (HALL, JAZZ, DANCE, THEATER 1,
THEATER 2) and DSP off. Use to create different
surround sound effects from any stereo source
(see page 22).
# MUTING button
Use to mute all audio without affecting any of the
current sound settings.
$ CHANNEL LEVEL+/– buttons
Use to set the relative speaker volumes for all the
speakers in your system (see 7 above) (see pages
15, 16).
% VOLUME +/– buttons
Use to set the overall listening volume.
^ FL DIMMER button
Use this button to make the fluorescent display
(FL) dimmer or brighter. There are three
brightness settings as well as an off setting.
CLASS
MPX
D. ACCESS
SOURCE
SOURCE SELECT
TAPE
CD
TUNER
CH
SELECT
FUNCTION
FL
DIMMER
RECEIVER
*&#
#
@
@
EFFECT
ASMS SEARCH
T.TONE
FM/AM
MUTING
VOLUME
DSP MODESORROUND
2
!
!
STAV-3860
AUDIO/VIDEO SYSTEM REMOTE
LEVEL
DISC/STATION
$
$
DECK1
DECK2
TUNING
TUNING
1234
56
90
78
OSR
POWER
POWER
&
1
9
8
7
6
5
4
3
2
0
^
%
$
#
@
!
~
=
-
REMOTE CONTROL