Filter
Top Products
18
DISPLAY
1 2 PRO LOGIC indicator
Lights when any Dolby Pro Logic mode is
selected.
The main character display briefly shows the
current Pro Logic mode (PRO LOGIC,
THEATER 1, THEATER 2) after selection (see
page 20).
2 DSP indicator
Lights when any DSP mode is selected. The main
character display briefly shows the current DSP
mode (HALL, JAZZ, DANCE, THEATER1 and
THEATER 2) after selection (see page 22).
3 DIRECT indicator
Lights when source DIRECT is on. This function
bypasses all tone, balance, DSP and Dolby
Surround effects.
4 MONITOR indicator
Lights when MONITOR is selected to hear a
recording as it's being made (see page 26).
5 TUNER indicators
MONO:
Lights when the mono mode is set using the
MPX MODE button (see page 23).
TUNED:
Lights when a broadcast is being received.
STEREO:
Lights when a stereo FM broadcast is being
received in auto stereo mode.
6 MASTER VOLUME LEVEL
Shows the overall volume level. Volume level is
maintained even when the power is off. ---dB
indicates the minimum level, and 0dB indicates
the maximum level.
• Depending on the level settings for
individual channels, the MAX level can
range between –10dB and 0dB.
7 SPEAKER indicator
Shows if the speaker system is on or not. If SP
3A appears, speakers are switched on.
If SP 3 appears, speakers are switched off.
8 S. BASS indicator
Lights when the S. BASS is on (see note %
on page 17).
9 CHARACTER display
Shows the radio frequency or function (DVD/LD,
CD, etc.) receiver is using .
dB
PRO LOGIC DSP DIRECT MONITOR
S. BASS
TUNED
MONO
SP A STEREO
12 435
6789