Filter
Top Products
15
SETTING UP SPEAKER LEVELS FOR DOLBY PRO LOGIC
For the best surround sound, set up the relative speaker levels so that they all have the same volume from
your normal listening position. Follow the steps:
CLASS
MPX
D. ACCESS
SOURCE
SOURCE SELECT
TAPE
CD
TUNER
CH
SELECT
FUNCTION
FL
DIMMER
RECEIVER
*&
&
#
#
@
@
EFFECT
ASMS
SEARCH
T.TONE
FM/AM
MUTING
VOLUME
DSP MODE
2
!
!
CHANNEL
LEVEL
DISC/STATION
$
$
DECK 1
DECK 2
TUNING
TUNING
1234
56
90
78
POWER
POWER
STAV-3860
AUDIO/VIDEO SYSTEM REMOTE
OSR
SORROUND
3, 5
4
1
2
SETTING UP SPEAKER LEVELS FOR DVD 5.1 CH
CLASS
MPX
D. ACCESS
SOURCE
SOURCE SELECT
TAPE
CD
TUNER
CH
SELECT
FUNCTION
FL
DIMMER
RECEIVER
*&
&
#
#
@
@
EFFECT
ASMS
SEARCH
T.TONE
FM/AM
MUTING
VOLUME
DSP MODE
2
!
!
CHANNEL
LEVEL
DISC/STATION
$
$
DECK 1
DECK 2
TUNING
TUNING
1234
56
90
78
POWER
POWER
STAV-3860
AUDIO/VIDEO SYSTEM REMOTE
OSR
SORROUND
1
3
,
5
,
7
4
,
6
,
7
2
memo
1 Press the 2 button.
2 Press the SURROUND button.
3 Press the T.TONE button.
A short test tone will be heard in turn from each speaker in
your set up, except the subwoofer.
4 Adjust the respective speaker levels with the
CHANNEL LEVEL +/– buttons when the TEST TONE sounds
from that speaker.
Adjust the volumes of the speakers so that the volume of all
speakers appears equal from your normal listening position.
5 Press T.TONE again.
When you are satisfied that the set up is complete, press the
T.TONE button to return to normal operation.
• No TEST TONE sounds for the subwoofer
• These speaker level settings are applicable to
PRO LOGIC, PRO LOGIC with THEATER 1 & PRO
LOGIC with THEATER 2 settings.
1 Use the FUNCTION button to select DVD 5.1 CH input mode.
2 Play a DVD 5.1 CH source and set the master volume to a
moderate level.
3 Press the CH SELECT button.
The first speaker, FL (front left), and its relative volume level
(+/– **dB) appears in the display.
4 Adjust the front left (FL) speaker level with the
CHANNEL LEVEL +/– buttons.
Adjust the volumes of the speakers to a standard level of your
choice when seated in your normal listening position.
5 Press CH SELECT again to move to the next speaker.
The second speaker CT (center) and its relative volume level
(+/– **dB) appears in the display.
6 Adjust the center (CT) speaker level with the
CHANNEL LEVEL +/– buttons.
Adjust the speaker volume so it seems the same as the previous
speaker from your normal listening position.
7 Repeat steps 3 & 4 for all of your speakers.
Adjust the volumes of the all speakers so their volume seems
the same from your normal listening position.