RCA STAV3860 Stereo Receiver User Manual


 
2
INTRODUCTION
The RCA STAV–3860 has these great features.
Five Channels of Independent Amplification — five independent power amplifiers, each rated at
60W, ensure accurate, dynamic reproduction of all multi-channel material.
Dolby* Pro Logic — enjoy stunning multi-channel, surround sound effects from movies and other
material recorded in Dolby Surround/Pro Logic. Enhance your listening experience further with built-in
signal processing that recreates the movie theater ambience in your living room.
Digital Surround Effects — using Digital Signal Processing (DSP) technology, various listening
environments, such as a theater or a jazz club, may be simulated and applied to any music or video
source.
DVD 5.1 Channel Input — a special 5.1 Channel input makes the STAV-3860 fully compatible with
Dolby Digital decoders and DVD players with 5.1 channel outputs.
The Energy-saving Design — this unit is designed to use minimal electricity when power is switched
OFF (in Standby mode). Regarding the value of the power consumption in standby mode, refer to
“Specifications” on pages 31.
©1999 Tandy Corporation.
All Rights Reserved.
Note to the Cable TV System Installer:
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the
National Electrical Code that provides guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the grounding system of the building as
close to the point of cable entry as practical.
* Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories.
Confidential unpublished works. © 1992-1997 Dolby Laboratories.All rights reserved.