Filter
Top Products
21
LISTENING IN DVD 5.1 CHANNEL INPUT MODE
You can use this feature if you have a DVD player and a Dolby Digital decoder or a DVD player with a
built-in Dolby Digital decoder. Both these decoders will have separate analog audio outputs for the front
left and right, center, surround left and right, and sub-woofer channels. Connect these to the 5.1 channel
inputs of the STAV-3860 for enhanced playback of Dolby Digital material—see page 10 for instructions
on connecting. 5.1 channel mode of the STAV-3860 provides better surround-channel sound and overall
channel separation than the Dolby Pro Logic mode.
Follow the steps below to use the 5.1 channel mode.
CLASS
MPX
D. ACCESS
SOURCE
SOURCE SELECT
TAPE
CD
TUNER
CH
SELECT
FUNCTION
FL
DIMMER
RECEIVER
*&
&
#
#
@
@
EFFECT
ASMS
SEARCH
T.TONE
FM/AM
MUTING
VOLUME
DSP MODE
2
!
!
CHANNEL
LEVEL
DISC/STATION
$
$
DECK 1
DECK 2
TUNING
TUNING
1234
56
90
78
POWER
POWER
STAV-3860
AUDIO/VIDEO SYSTEM REMOTE
OSR
SORROUND
1
1
1 Use the FUNCTION button to select DVD 5.1 CH.
On the receiver, press the DVD 5.1 CH function button to select
the DVD input mode directly.
On the remote control, repeated presses of the FUNCTION
button switches between 5.1 channel input and the other
inputs.
• You can input level settings spefically for the 5.1 CH
mode to enhance you surround sound experience
(see "Setting Up Speaker Levels for DVD 5.1CH" on
page 15).
• The tone controls, S.BASS, or the DIRECT function are
not available in 5.1 CH mode.
memo