Filter
Top Products
Setup and Connections
7
How to View Your Components
To watch the digital receiver in this connection, tune the TV to CH 3 or
4. You may change the output channel.
To record programming, tune the receiver to the desired channel and
set your VCR to record on channel 3 or 4.
To view VCR recordings, tune the TV to the VCR output channel (usually
CH 3 or 4) and set your VCR to play. If your VCR is a brand other than
RCA, GE, or ProScan, you may need to program the remote to control
the VCR. See the next section, Programming the Remote.
CAUTION
Do not stack electronic components or
other objects on top of the digital
receiver. See Safety Information, inside
front cover.
Basic Connection
DIGITAL
RECEIVER
VCR
IN FROM ANT
OUT TO TV
IN
CH3
CH4
TV
DIGITAL
ANTENNA