Filter
Top Products
The Advanced MCACC menu
10
71
En
Chapter 10:
The Advanced MCACC menu
Making receiver settings from the
Advanced MCACC menu
The Advanced MCACC (Multi Channel ACoustic
Calibration) system was developed in Pioneer’s
laboratories with the aim of making it possible for home
users to perform adjustments of the same level as in a
studio easily and with high precision. The acoustic
characteristics of the listening environment are
measured and the frequency response is calibrated
accordingly to allow high precision, automatic analysis
and optimal calibration of the sound field to bring it
closer to a studio environment than ever before.
Furthermore, while it was previously difficult to eliminate
standing waves, this receiver is equipped with a standing
wave control function using a unique pr ocess to perform
acoustic analysis and reduce their in
flu
ence.
This section describes how to calibrate the sound field
automatically and fine-adjust the sound field data
manually.
1 Switch on the receiver and your TV.
Use RECEIVER to switch on.
1
•If headphones are connected to the receiver,
disconnect them.
2 Press on the remote control, then press
HOME MENU
.
2
A Graphical User Interface (GUI) screen appears on your
TV. Use /// and ENTER to navigate through the
screens and select menu items. Press RETURN to
confirm and exit the current menu.
•Press HOME MENU at any time to exit the HOME
MENU.
3Select ‘
Advanced MCACC
’ from the
HOME MENU
,
then press
ENTER
.
4 Select the setting you want to adjust.
• Full Auto MCACC – See Automatically setting up for
surround sound (Auto MCACC) on page 39 for a quick
and effective automatic surround setup.
• Auto MCACC – See Automatic MCACC (Expert) on
page 72 for a more detailed MCACC setup.
• Manual MCACC – Fine-tunes your speaker settings
and customize the Acoustic Calibration EQ (see
Manual MCACC setup on page 74).
• Demo – No settings are saved and no errors occur.
When the speakers are connected to this receiver,
the test tone is output repeatedly. Press RETURN to
cancel the test tone.
Note
1Make sure not to switch off the power when using the HOME MENU.
2 You can’t use the HOME MENU when the iPod/USB input function is selected (in either the main or sub zone). When you set ZONE 2, ZONE
3 or ZONE 2&3 to ON (page 63), you can’t use the HOME MENU.
DVD BD DVR HDMI
TV CD CD-R
TUNER
INPUT SELECT
VIDEO
iPod USB
RECEIVER
SOURCE
T. ED I T
GUIDE
TOP MENU
BAND
RETURN
iPod CTRL
HOME
MENU
LIST
TOOLS
PTY
SEARCH
AUDI O
PARAMETER
ENTER
TUNE
PRESET PRESET
TUNE
VIDEO
PARAMETER
REMOTE
SETUP
ZONE 2
MAIN
ZONE 3
TV/DTV
AUDIO
INFO
DISP
MPX PQLS
CH
RECEIVER
TV CTRL
RECEIVER
1. Advanced MCACC
2. MCACC Data Check
3. Data Management
4. System Setup
Exit Return
HOME MENU
A/V RECEIVER
a. Full Auto MCACC
b. Auto MCACC
c. Manual MCACC
d. Demo
1.Advanced MCACC
A/V RECEIVER
Exit Return
VSX-LX52_SVYXJ.book 71 ページ ２００９年２月２６日 木曜日 午後４時３１分