Filter
Top Products
Controls and displays
02
11
En
Front panel
1
INPUT SELECTOR
dial
Use to select an input function.
2
STANDBY/ON
Switches the receiver between on and standby. Power
indicator lights when the receiver is on.
When the KURO LINK function is set to ON, the power
indicator lights dimly when the power is in standby.
3 Tuner controls
BAND – Switches between AM and FM radio bands
(page 48).
TUNE +/– – Use to find radio frequencies (page 48).
PRESET +/– – Use to find preset stations (page 48).
TUNER EDIT –
Use with
TUNE +/–
,
PRESET +/–
and
ENTER
to memorize and name stations for recall
(page 48)
.
4
PHASE CONTROL
indicator
–
Lights to indicate
Phase Control is selected
(page 55)
.
ADVANCED MCACC indicator
–
Lights when
EQ
is
set to
ON
in the
AUDIO PARAMETER
menu
(page 60)
.
PQLS indicator – Lights when the PQLS feature is
active (page 59).
HDMI
indicator
– Blinks when connecting an HDMI-
equipped component; lights when the component is
connected
(page 23)
.
5 Character display
See Display on page 12.
6
ENTER
7 Remote sensor
Receives the signals from the remote control (see
Operating range of remote control unit on page 8).
8
MASTER VOLUME
dial
9
PHONES
jack
Use to connect headphones. When the headphones are
connected, there is no sound output from the speakers.
10 Listening mode buttons
AUTO SURR/ALC/STREAM DIRECT –
Switches
between Auto Surround
(page 50)
, Auto level control
mode and Stream Direct mode
(page 53)
.
STEREO – Switches between stereo playback and
Front Stage Surround Advance modes (page 52).
ADVANCED SURROUND – Use to switch between
the various surround modes (page 51).
STANDARD SURROUND – Press for Standard
decoding and to switch between the various 2 Pro
Logic IIx and Neo:6 options (page 50).
HOME THX – Press to select a Home THX listening
mode (page 51).
11
SPEAKERS
Use to change the speaker system (page 63).
12
MULTI-ZONE
controls
If you’ve made MULTI-ZONE connections (see MULTI-
ZONE setup on page 31) use these controls to control the
sub zone from the main zone (see Using the MULTI-ZONE
controls on page 63).
13
MCACC SETUP MIC
jack
Use to connect the supplied microphone (page 39).
14
iPod/iPhone/USB
terminals
Use to connect your Apple iPod as an audio and video
source, or connect a USB device for audio and photo
playback (page 36).
15 HDMI input connector
Use for connection to compatible HDMI device (Video
camera, etc.). See Connecting an HDMI-equipped
component to the front panel input on page 35.
MASTER
VOLUME
INPUT
SELECTOR
STANDBY/ON
VSX-LX52
PHONES
BAND TUNE TUNE
PHASE
CONTROL
AUTO SURR
/ALC/
STREAM DIRECT
ADVANCED
SURROUND
STANDARD
SURROUND
MCACC SETUP MIC
STEREO
SPEAKERSHOME THX
USB
CONTROL
MULTI-ZONE
ON
/
OFF
ADVANCED
MCACC
HDMIPQLS PRESET PRESET TUNER EDIT
ENTER
iPod
iPhone
VIDEO
CAMERA
HDMI 4
12 345
910 141211 13
15
786
VSX-LX52_SVYXJ.book 11 ページ ２００９年２月２６日 木曜日 午後４時３１分