Filter
Top Products
Using the tuner
06
37
En
3Press
ST
/
to select the program type you want
to hear.
4Press
ENTER
to search for the program type.
The system starts searching through the station presets
for a match. When it finds one, the search stops and the
station plays for five seconds.
5 If you want to keep listening to the station, press
ENTER
within the five seconds.
If you don’t press ENTER, searching resumes.
If NO PTY is displayed it means the tuner couldn’t find
that program type at the time of the search.
1
Displaying RDS information
Use the DISPLAY button to display the different types of
RDS information available.
2
•Press
DISPLAY
for RDS information.
Each press changes the display as follows:
• Radio Text (RT) – Messages sent by the radio station.
For example, a talk radio station may provide a phone
number as RT.
• Program Service Name (PS) – The name of the radio
station.
•Program Type (PTY) – This indicates the kind of
program currently being broadcast.
• Current tuner frequency.
Using EON
When EON (Enhanced Other Network information) is
turned on, the receiver jumps to an EON-linked
broadcast when it begins, even if a receiver function
other than the tuner is being used. It can’t be used in
areas that EON information isn’t transmitted and when
FM broadcast stations don’t transmit PTY data. When the
broadcast ends, the tuner returns to the original
frequency or function.
1Press
FM/AM
to select the FM band.
3
2Press
EON
to select one of the possible modes.
Press repeatedly to switch between:
• EON TA (Traffic Announcement) – Sets the tuner to
pick up traffic information when it is broadcast.
• EON NEWS – Sets the tuner to pick up news when it
is broadcast.
• OFF – Switches off the EON feature.
When set to TA or NEWS, the EON indicator in the
display lights (it flashes when receiving an EON
broadcast).
4
The indicator in the display lights when
the current station carries the EON service.
5
Note
1 RDS searches station presets only. If no stations have been preset, or if the program type could not be found among the station presets NO PTY is
displayed. FINISH means the search is complete.
2 • If any noise is picked up while displaying the RT scroll, some characters may be displayed incorrectly.
• If you see NO RADIO TEXT DATA in the RT display, it means no RT data is sent from the broadcast station. The display will automatically switch to the
PS data display (if no PS data, the frequency is displayed).
• In the PTY display, NO DATA or NO TYPE may be shown. In this case, the PS display is shown after a few seconds.
3 EON is only possible in the FM band.
4 You can’t search for traffic announcements and news at the same time.
5 • You cannot operate the T.EDIT and PTY SEARCH buttons while the EON indicator in the display is lit.
• If you want to change to a function other than the tuner when the EON indicator is flashing, press EON to turn EON off.
DVR 1 DVR 2 CD CD-R
DIMMER
FM/AM
123
SLEEPMCACC
INPUT
SELECT
GENRE
456
iPod USBFM/AM
DIRECT
THX STATUS PHASE
TV CTRL
HDD
A.L.C.
DVD
STANDARD
ADV SURR
DTV/TV
AUDIO
DISPLAY
EON MPX
SIGNAL SEL
CH
RECEIVER
EON
VSX-LX51_HY.book 37 ページ ２００８年４月１６日 水曜日 午後４時３９分