Pioneer VSX-LX50 Stereo Receiver User Manual


 
Before you start
01
7
En
Easy-to-use LCD remote control
The remote control gives you not only complete control
over every function of this receiver, but also over the main
functions for other components in your home theater
system. Using a system of preset codes, you can program
the remote to operate a wide range of other equipment.
Checking what’s in the box
Please check that you’ve received the following supplied
accessories:
Setup microphone (cable: 5 m)
Remote control unit
AA/IEC R6P dry cell batteries x2
•AM loop antenna
•FM wire antenna
Warranty card
These operating instructions
Installing the receiver
When installing this unit, make sure to put it on a
level and stable surface.
Don’t install it on the following places:
– on a color TV (the screen may distort)
– near a cassette deck (or close to a device that gives off
a magnetic field). This may interfere with the sound.
– in direct sunlight
– in damp or wet areas
– in extremely hot or cold areas
– in places where there is vibration or other movement
– in places that are very dusty
– in places that have hot fumes or oils (such as a kitchen)
Loading the batteries
Caution
Incorrect use of batteries may result in such hazards as
leakage and bursting. Observe the following precautions:
Never use new and old batteries together.
Insert the plus and minus sides of the batteries
properly according to the marks in the battery case.
Batteries with the same shape may have different
voltages. Do not use different batteries together.
When disposing of used batteries, please comply
with governmental regulations or environmental
public instruction’s rules that apply in your country or
area.
Do not use or store batteries in direct sunlight or
other excessively hot place, such as inside a car or
near a heater. This can cause batteries to leak,
overheat, explode or catch fire. It can also reduce the
life or performance of batteries.
VSX-LX50_HY.book Page 7 Thursday, March 8, 2007 1:18 PM