Filter
Top Products
Using Other Functions
82
En
SYSTEM OFF
The SYSTEM OFF feature allows you to tell the receiver and your other components to stop and/or turn off with
the push of only one button on the remote control. For example, you can program the unit to stop your DVD,
turn off your TV and turn off your DVD player. You don't need to program power off for PIONEER components,
they will go off automatically in this mode. The receiver itself will go off automatically as well.
The steps below show you how to program a string of up to 5 different SYSTEM OFF operations.
Be sure to set up each component before programming the SYSTEM OFF function (see “Setting
Up the Remote Control to Control Other Components“, pages 66-69).
memo
OFF
S0URCE
Î
TV
MULTI CONTROL
SYSTEM RECEIVER
DVD/LD TV/SAT TV CONT
VCR1/
DVR
VCR2 VIDEO CD
MULTI
OPERATION
DIMMER
MD/
TAPE2
CD-R/
TAPE1
TUNER
RECEIVER
1
2
LOUDNESS TONE
3
4
DNR
5
SIGNAL SEL
VIDEO SEL HI-BIT
6
DIRECT ACCESS SEARCH MODE
–
+
+
10
DISC
ENTER
7
EFFECT/CH SEL
8
9
BASS/TREBLE
0
SYSTEM SETUP
TUNER EDIT TRACK
MENU
GUIDE
TOP MENU
REMOTE
SETUP
MPX
AUDIO
EXIT
RETURN
ENTER
¶
TUNING
–
STATION
MODE
SURROUND
–
CHANNEL
–
1
4
TEXT ON RF ATT DISP MODE
TUNING
+
+
CHANNEL
+
¡
STATION
¢
8
3
7
SUB TITLE
BAND
TEXT OFF CLASS
TV INPUT
TV CONTROL
TV CH
TV VOL VOLUME
INPUT
MIDNIGHT
MULTI CH
INPUT
STEREO/
DIRECT
MOVIE
MUSIC
ENTER
MUTE
SB CH
MODE
ACOUSTIC
EQ
SETUP
2-4
8-9
1
5
6
• To exit from the REMOTE SETUP mode at
anytime press the REMOTE SETUP button.
• The display will disappear after one minute or
so if no new commands are entered. Press any
button to wake up the remote and continue the
process.
1
Press the REMOTE SETUP button for
more than three seconds.
The REMOTE SETUP menu appears on the remote
display.
2
Use the 5∞ buttons to select SYS
OFF and press ENTER.
SYSTEM OFF appears in the remote display.
3
Use the 5∞ buttons to select first
command. "1st Cmmnd" appears in
the display. Press ENTER.
This tells the receiver this will be the first command.
To erase a command
Select CLEAR and press ENTER. Then go to step 7.
To go back one step
Select EXIT and press ENTER.
4 To setup a command select CHANGE
and press ENTER.
FUNCTION flashes in the display,
5 Select the component whose
command you want to input (for
example, a DVD player), and press
the MULTI CONTROL button for it.
KEY will flash in the display.
6
Select a button for the command you
want to input (for example, 7 [stop]).
COMPLETE appears in the display.
7
Repeat steps 3-6 to program a
sequence of up to five commands.
You can assign SYSTEM OFF information for up to 5
commands.
8
When done select EXIT and press
ENTER.
You will return to the REMOTE SETUP menu.
9
Select EXIT and press ENTER again.
You will exit the REMOTE SETUP menu and return to
normal operation.
memo
Buttons that
can be
programmed
with do
SYSTEM
OFF Opera-
tions