Filter
Top Products
38
En
QUICK setup
This simple and quick setup method allows you to make all the necessary settings manually with the minimum
of hassle. If you did the AUTO SURROUND SOUND SETUP method on pages 13-15 you don’t need to do this
setup. You must have front and surround speakers hooked up to use this setup.
You only need to do these settings once (unless you change the placement of your current speaker system or
add new speakers, etc.). If starting fresh, complete steps 1-3 in page 36.
Setting Up for Surround Sound
VIDEO SEL HI-BIT
DIRECT ACCESS SEARCH MODE
–
+
10
DISC
ENTER
9 0
SYSTEM SETUP
TUNER EDIT TRACK
MENU
GUIDE
TOP MENU
MPX
AUDIO
EXIT
RETURN
ENTER
¶
TUNING
–
1
TEXT ON RF ATT DISP MODE
TUNING
+
¡
8
3
SUB TITLE
BAND
1-4
1
1.Surround Setup
[ SurrBack System ]
[ Auto Setting ]
[ Quick ]
[ Normal ]
[ Expert ]
[ Exit
]
1
Use the 5∞ buttons to select QUICK.
Press the ENTER button.
The setup possibilities appear on your TV.
2
Use the 5∞ buttons to navigate
through the QUICK setup menus. When
you get a menu you want to adjust
press ENTER.
3
In a menu use the 5∞ buttons to select
the different settings. When you have
the setting you want in a particular
menu, press ENTER.
Make the adjustments that match your home setup
using the buttons described above.
SUBWOOFER setting:
If you connected a subwoofer select YES, if you didn’t
select NO.
CENTER SP setting:
If you connected a CENTER speaker select YES, if you
didn’t select NO.
SURRBACK SP setting:
If you connected a SURROUND speaker(s) select YES, if
you didn’t select NO.
ROOM SIZE setting:
Tell the receiver your room size so it can equalize the
speakers properly. Use the chart below for an approximate
definition of the settings.
SMALL: 2.5 m by 3.5 m
MEDIUM: 4 m by 5 m
LARGE: 5.5 m by 7.5 m
LISTENING POSITION setting:
This setting establishes where your ideal listening position
is. Choose from the three possibilities following the guide
below.
FRONT: your listening position is closer to the front
speakers.
CENTER: your listening position is equidistant to the
front and surround speakers.
REAR: your listening position is closer to the surround
speakers.
4
Use the 5∞ buttons to select the EXIT.
Press the ENTER button.
You will return to the SURROUND SETUP menu display.
If you want to change a setting before proceeding
start over from step 1.
2
QUICK
Subwoofer [ YES
Center SP [ YES
SurrBack SP
[ YES
Room size
Medium
]
Listening Position
[ Center ]
]
]
]
[
[Exit]
[
[Exit ]
QUICK
Subwoofer [ YES
Center SP [ YES
SurrBack SP
[ YES
Room size
Small
]
Listening Position
[ Front ]
]
]
]
4
1-4
STANDBY/ON
MOVIE MUSIC
MULTI JOG
ENTER
STANDBY
PHONES
SPEAKERS
SIGNAL
SELECT
SB CH
MODE
HI-BIT
HI-SAMPLING
SET UP RETURN
TONE
TONE CONTROL
BASS/TREBLE
BAND
MULTI JOG CONTROL
memo
If you do the QUICK setup after
the AUTO SURROUND SOUND
SETUP the former will replace the
latter.