Pioneer VSX-D2011-S Stereo Receiver User Manual


 
12
En
OFF
S0URCE TV
MULTI CONTROL
SYSTEM
RECEIVER
DVD/LD TV/SAT TV CONT
VCR1/
DVR
VCR2 VIDEO CD
MULTI
OPERATION
DIMMER
MD/
TAPE2
CD-R/
TAPE1
TUNER
RECEIVER
1
2
LOUDNESS TONE
3
4
DNR
5
SIGNAL SEL
VIDEO SEL HI-BIT
6
DIRECT ACCESS SEARCH MODE
+
+
10
DISC
ENTER
7
EFFECT/CH SEL
8
9
BASS/TREBLE
0
SYSTEM SETUP
TUNER EDIT TRACK
MENU
GUIDE
TOP MENU
MPX
AUDIO
EXIT
RETURN
ENTER
TUNING
STAT ON
1
TEXT ON RF ATT DISP MODE
TUNING
+
+
¡
STAT ON
8
3
SUB TITLE
BAND
TEXT OFF C ASS
SETUP
1
2,7
3-6
1
Turn on the receiver and your TV,
press the RECEIVER button on the
remote control.
2
Press the SYSTEM SETUP button.
The SYSTEM SETUP menu appears on your TV (if
it doesn't, refer to page 10 to make sure you have
properly connected the receiver to your TV).
3
Looking at the on-screen display on
your TV, use the 5∞ buttons to
select INPUT ASSIGN. Press the
ENTER button.
4
DIGITAL IN-SELECT should be
selected, if not use the 5∞ buttons
to select it. Press the ENTER
button.
5
Use the 5∞ buttons to select
DIGITAL-2 and press ENTER.
The default setting for the DIGITAL-2 jack is CD-R.
6
Use the 5∞ buttons to select DVD/
LD and press ENTER.
7
Press the SYSTEM SETUP button.
The receiver exits the setup process.
44
44
4 Assigning the Digital Inputs
This is only necessary if you did not hook up your DVD player to DIGITAL IN 3 using a coaxial cable but
rather connected it to one of the optical digital inputs. The following example shows how to assign the
DIGITAL IN 2 jack to DVD. Use the arrow buttons (5∞) and the ENTER button on the remote control to
navigate the on-screen display (OSD) on your TV. Conversely, you can use the MULIT JOG dial and ENTER
button, and look at the display, on the Front Panel.
Digital-In Select
Digital-1 [TV/SAT]
Digital-2 [DVD/LD]
Digital-3 [ OFF ]
Digital-4 [ CD ]
[Exit]
3
4
5
System Setup
[ 1. Surround Setup
[ 2. THX CINEMA Setup
[ 3. Input Assign
[ 4. Function Rename
[ 5. PHONO/LINE Setup
[ Exit
]
]
]
]
]
]
3.Input Assign
[ Digital-In Select ]
[ Component-In Select ]
[Exit]
33
33
3 Setting up the Main Unit
1 Plug the AC power cord into a wall outlet.
2 Press the
OFF-ON button to put the receiver in ON mode.
3 Press the
STANDBY/ON button to switch the receiver ON.
6
Digital-In Select
Digital-1 [TV/SAT]
Digital-2 [ CD-R ]
Digital-3 [DVD/LD]
Digital-4 [ CD ]
[Exit]
Easy Setup Guide Part1