Filter
Top Products
32
En
Displays & Controls
! MULTI OPERATION button
Use this button to start the MULTI OPERATION
mode. See page 80-81 for how to program and
use the MULTI OPERATION mode.
@ RECEIVER button
Use this button to switch the remote control
into receiver mode in order to get certain
receiver functions or do receiver setups.
# TOP MENU/GUIDE button
Use to find stations or menus on a digital TV
tuner. For a DVD player use this button to bring
up the DVD menu.
$ RETURN button
When you are in a receiver setup operation this
button will go back one step in the SYSTEM
SETUP procedure. When you are using your
DVD menu screen this button acts the same as
the DVD player's "RETURN" button. When you
are using cable tuners, satellite tuners or digital
TV tuners this button will either exit you from
the menu screen or act like a "RETURN" button
above, depending on the maker of the unit.
% INPUT button
Press to select an input source. The button will
cycle through all the possible sources.
^ VOLUME (+/–) buttons
Use to raise or lower the volume of the receiver.
& MIDNIGHT button (see page 51)
Switches the MIDNIGHT listening mode on or
off (for all modes except THX CINEMA and
MULTI CH IN).
* MUTE button
Press to mute or restore the volume.
( MULTI CH INPUT button (see page 53)
Use this button to select the component you
have hooked up to the MULTI CH IN terminals
(for example, a DVD-Audio player).
) ACOUSTIC EQ button (see pages 99-
101)
Press to switch on/off and select the type of
acoustic calibration EQ.
_ REMOTE SETUP button.
Use to customize the remote control functions
and the remote control itself. (See “Setting Up
the Remote Control to Control Other Compo-
nents“ starting on page 66).