Filter
Top Products
18
En
03
Front Panel
1 — OFF/ _ ON (Main power) button
Press this button to the ON position so that the
power button on the remote control will be opera-
tional. If the button is OFF (—), the power of the
receiver is shut off and the RECEIVER
button on
the remote control does not function. When this
button is ON, the power button on the remote
control toggles between ON and STANDBY mode.
2 STANDBY indicator
Lights when the receiver is in standby mode. The
receiver uses a small amount of electricity (1W) in
standby mode.
3 INPUT SIGNAL indicators
Indicates the kind of input signal.
DIGITAL :
When a digital source is input this indicator will
light.
MULTI :
When a multichannel source is input this indicator
will light.
4 DECODE MODE indicators
Indicates how the signal is being decoded.
2 PRO LOGIC:
Lights when 2 PRO LOGIC decoding is in use.
2 DIGITAL:
Lights when playing a 2 DIGITAL sound source
DTS:
lights when playing a DTS sound source .
MPEG:
Lights when playing an MPEG source.
5 2 Ch Listening Mode indicators
When these indicators are lit sound is only coming
from the front speakers (and possibly the subwoofer
in some settings) or headphones.
VIRTUAL/PHONES SURR.:
Lights when the VIRTUAL or PHONES SURR.
listening modes are selected.
STEREO: Lights in stereo mode.
6 MASTER VOLUME
Use to set the overall listening volume.
7 Input buttons
Use to select the playback source: the possibilities are
DVD, TV/SAT, VCR, TUNER and FRONT.
8 FRONT jacks
You can connect a portable DVD player, video
camera, video game system, or whatever equipment
you would like to have handy, to the
FRONT jacks
(refer to page 13).
9 PHONES jack
Use to connect headphones (this switches the
speakers off).
0 Volume level indicator
- MIDNIGHT indicator
Lights when Midnight Listening mode is on.
= CHARACTER display
Shows the current input (DVD, TV/SAT, etc.),
listening mode, radio frequency, etc.
~ TUNER indicators
STEREO: Lights when a stereo FM broadcast is being
received in auto stereo mode.
TUNED: Lights when a broadcast is being received.
MONO: Lights when the mono mode is set using the
MPX button.
RDS: Lights when an RDS broadcast is received.
RF ATT: Lights when the RF ATT is on (see p. 33).
DISPLAY
Displays & Controls
STANDBY
PHONES VIDEO AUDIO DIGITAL IN
FRONT INPUT
INPUT SIGNAL
DIGITAL
2
DIGITAL
2
PROLOGIC DTS MPEG
VIRTUAL
PHONES SURR.
STEREO
AUDIO/VIDEO MULTI-CHANNEL RECEIVER VSX-C300
DVD TV/SAT VCR FRONTTUNER
MASTER
VOLUME
DOWN UP
MULTI ch
LR
OFF ON
12 3 4 6
789
5
B
d
TUNED
STEREO
MONO
RDS
RF
ATT
~
= 0-