Filter
Top Products
Other Settings
12
65
En
English
Français
Deutsch
Nederlands
Italiano
Español
3 When you’re finished, press
RETURN
.
You return to the Other Setup menu.
SR+ Setup for Pioneer plasma displays
Make the following settings if you have
connected a Pioneer plasma display to this
receiver using an SR+ cable. Note that the
number of settings available will depend on the
plasma display you’ve connected.
See also
Using this receiver with a Pioneer
plasma display
on page 60.
1 Select ‘SR+ Setup’ from the Other Setup
menu.
2 Select the ‘PDP Volume Control’ setting
you want.
•
OFF
– The receiver does not control the
volume of the plasma display.
•
ON
– When the receiver is switched to one
of the inputs that use the plasma display
(
DVD/LD
, or another function below), the
volume on the plasma display is muted so
only sound from the receiver is heard.
3 Assign any input source connected to the
plasma display to the corresponding input
number.
This matches the receiver’s input source with a
numbered video input on the plasma display.
For example, assign
DVD/LD
to
input-2
if you
have connected your DVD video output to video
input 2 on the plasma display.
• The
Monitor Out Connect
should be set
to the input that you’ve used to connect
this receiver to your plasma display.
4 When you’re finished, press
RETURN
.
You return to the Other Setup menu.
Digital Video Converter Setup
• Default setting:
ON
The video converter allows you to see analog
video sources through all of this receiver’s
MONITOR VIDEO OUT
jacks. Note that the
converter gives priority to component, S-video,
then composite (in that order). See
About the
video converter
on page 13 for more on this.
1 Select ‘
DVC
Setup’ from the Other Setup
menu.
2 Choose the setting that you want.
•
ON
– All analog video signals are output
from the
MONITOR VIDEO OUT
jacks.
•
OFF
– No conversion between video
formats.
3 When you’re finished, press
RETURN
.
You return to the Other Setup menu.
6.Other Setup
:Return
a.DRC Setup
b.Dual Mono Setup
c.LFE ATT Setup
d.SR
+
Setup
e.DVC Setup
PDP Volume Control
OFF
PDP Input Select
DVD/LD [ input–1 ]
TV/SAT [ input–2 ]
DVR [ input–3 ]
VIDEO [ TV ]
Monitor Out Connect
[ OFF ]
6d.SR
+
Setup
:Finish
6d.SR
+
Setup
:Finish
PDP Volume Control
[ ON ]
PDP Input Select
DVD/LD input–1
TV/SAT [ input–2 ]
DVR [ input–3 ]
VIDEO [ TV ]
Monitor Out Connect
[ OFF ]
6d.SR
+
Setup
:Finish
PDP Volume Control
[ ON ]
PDP Input Select
DVD/LD input–2
TV/SAT [ OFF ]
DVR [ input–3 ]
VIDEO [ TV ]
Monitor Out Connect
[ OFF ]
6.Other Setup
:Return
a.DRC Setup
b.Dual Mono Setup
c.LFE ATT Setup
d.SR
+
Setup
e.DVC Setup
DVC ON
6e. DVC Setup
:Finish
VSX-917V.book.fm 65 ページ ２００７年２月２２日 木曜日 午後８時２０分