Filter
Top Products
Other connections
11
61
En
English
Français
Deutsch
Nederlands
Italiano
Español
• Use a 3-ringed miniplug SR+ cable
1
to
connect the
CONTROL IN
jack of this receiver
with the
CONTROL OUT
of your plasma
display.
Before you can use the extra SR+ features, you
need to make a few settings in the receiver. See
SR+ Setup for Pioneer plasma displays
on
page 65 for detailed instructions.
To make the most of the SR+ features, you
should connect your source components (DVD
player, etc.) in a slightly different way to that
described in this chapter. For each
component, connect the video output directly
to the plasma display, and just connect the
audio (analog and/or digital) to this receiver.
Using the SR+ mode with a Pioneer
plasma display
When connected using an SR+ cable, a
number of features become available to make
using this receiver with your Pioneer plasma
display even easier. These features include:
• On-screen volume display.
• On-screen display of listening mode.
• Automatic video input switching on the
plasma display.
• Automatic volume muting on the plasma
display.
2
See also
SR+ Setup for Pioneer plasma
displays
on page 65 for more on setting up the
receiver.
1 Make sure that the plasma display and
this receiver are switched on and that they
are connected with the SR+ cable.
See
Using this receiver with a Pioneer plasma
display
above for more on this.
2 To switch SR+ mode on/off, press
RECEIVER
, then the SR+ button.
The front panel display shows
SR+ ON
or
OFF
.
Note
1• The 3-ringed SR+ cable from Pioneer is commercially available under the part number ADE7095. Contact the Pioneer Cus-
tomer Support division for more information on obtaining an SR+ cable (you can also use a commercially available 3-ringed
mini phone plug for the connection).
• If you connect to a Pioneer plasma display using an SR+ cable, you will need to point the remote control at the plasma dis-
play remote sensor to control the receiver. In this case, you won’t be able to control the receiver using the remote control if you
switch the plasma display off.
UPDOWN
MULTI JOG
MASTER
VOLUME
ENTER
VSX-917V
STANDBY/ON
PHONES
DVD/LD
TV/SAT
DVR/VCR VIDEO/FRONT AUDIO
CD CD
-
R/TAPE/MD
USB
FM
MIDNIGHT/
LOUDNESS
SB ch
PROCESSING
SOUND
RETRIEVER
ACOUSTIC
EQ
PHASE
CONTROL
AUTO SURR/
DIRECT
TUNING/
STATION
SETUP RETURN
TONE
TUNER
EDIT
SIGNAL
SELECT
SPEAKERS
MULTI JOG
STANDARD
ADVANCED
SURROUND
STEREO/
F.S.S UR R
LISTENING
MODE
AM
AUX
PHASE
CONTROL
MCACC/
AUDIO INAUDIORLVIDEO DIGITAL IN
VIDEO INPUT
DIGITAL PRECISION
PROCESSING
USB
DVD player
This receiver
Pioneer plasma
display
Satellite receiver, etc
VIDEO
INPUT 1
VIDEO
INPUT 2
TV/SAT
AUDIO IN
DVD
AUDIO IN
2 The automatic volume muting feature is enabled separately; see
SR+ Setup for Pioneer plasma displays
on page 65.
RECEIVER
SOURCE
INPUT
SELECT
TV DVR
TV CTRL
CD
RECEIVER
AMFM
DVD
USB
CD-R/TAPE
F.A U D IO
AUDIO/VIDEO PRE-PROGRAMMED
REMOTE CONTROL UNIT
ANALOG
ATT
MIDNIGHT
SB ch
DIMMER
SLEEP
SR+
+10
D.ACCESS
SIGNAL SEL
CLASS
DISC
TUNE
ST ST
ENTER
TOP MENU
T. E D I T
MENU
VSX-917V.book.fm 61 ページ ２００７年２月２２日 木曜日 午後８時２０分