Filter
Top Products
The System Setup menu07
38
En
Chapter 7:
The System Setup menu
Making receiver settings from
the System Setup menu
The following section shows you how to make
detailed settings to specify how you’re using
the receiver (for example, if you want to set up
two speaker systems in separate rooms), and
also explains how to fine-tune individual
speaker system settings to your liking.
1 Switch on the receiver and your TV.
Use the
RECEIVER
button to switch on.
1
2 Press RECEIVER on the remote control,
then press the SETUP button.
2
An on-screen display (OSD) appears on your
TV. Use
///
and
ENTER
on the remote
control to navigate through the screens and
select menu items. Press
RETURN
to confirm
and exit the current menu.
3 Select the setting you want to adjust.
•
Surr Back System
– Specify how you are
using your surround back speakers (see
Surround back speaker setting
below).
•
Auto MCACC
– This is a quick and
effective automatic surround setup (see
Automatically setting up for surround
sound (MCACC)
on page 9).
•
Manual MCACC
– Fine tune your speaker
settings and customize the Acoustic
Calibration EQ (see
Manual MCACC
speaker setup
on page 39).
•
Manual SP Setup
– Specify the size,
number, distance and overall balance of
the speakers you’ve connected (see
Manual speaker setup
on page 43).
•
Input Assign
– Specify what you’ve
connected to the digital, component video
and HDMI inputs (see
The Input Assign
menu
on page 62).
•
Other Setup
– Make customized settings
to reflect how you are using the receiver
(see
The Other Setup menu
on page 63).
Surround back speaker setting
• Default setting:
Normal (SB)
There are several ways you can use the
surround back speaker channels with this
system. In addition to a normal home theater
setup where they are used for the surround
back speakers, they can be used for bi-amping
the front speakers or as a separate speaker
system in another room.
Note
1 If headphones are connected to the receiver, disconnect them.
2• You can’t use the System Setup menu when the Front Audio input is selected.
• Press
SETUP
at any time to exit the System Setup menu.
• The OSD will not appear if you have connected using the HDMI output to your TV. Use component, S-video or composite
connections for system setup.
RECEIVER
SOURCE
INPUT
SELECT
TV DVR
TV CTRL
CD
RECEIVER
AMFM
DVD
USB
CD-R/TAPE
F.A U D IO
AUDIO/VIDEO PRE-PROGRAMMED
REMOTE CONTROL UNIT
+10
D.ACCESS
SIGNAL SEL
CLASS
DISC
ENTER
TV CONTROL
VOL
TUNE
TUNE
ST ST
INPUT
SELECT
TV CH
TV VOL
ENTER
TOP MENU
T.EDIT
MENU
RETURN
GUIDE
SETUP
System Setup
1.Surr Back System
2.Auto MCACC
3.Manual MCACC
4.Manual SP Setup
5.Input Assign
6.Other Setup
: Exit
VSX-917V.book.fm 38 ページ ２００７年２月２２日 木曜日 午後８時２０分