Pioneer SX-SW330 Home Theater System User Manual


 
Other connections
08
23
En
English
Chapter 8
Other connections
Important
When connecting this system or changing
connections, be sure to switch power off and
disconnect the power cord from the wall socket.
After completing all connections, connect the power
cord to the wall socket.
Connecting auxiliary components
The receiver subwoofer has several digital inputs for
digital playback components, such as DVD, CD and MD
players.
Connect the digital output jack on your DVD
player, etc. to one of the DIGITAL input jacks on the
receiver subwoofer.
Use a commercially available optical cable or supplied
coaxial cable to make this connection.
Connecting an analog audio component
You can use the
ANALOG
input jacks to connect an
analog audio component, such as a tape player. See
Using
this system for TV audio
on page 11 for connection details
(this explains connecting the audio output from your TV,
but any analog audio component can be connected).
Listening to an external audio source
You can connect both analog and digital external audio
sources to this system. Digital audio sources include
digital satellite receivers, CD recorders, etc. Analog
sources include your TV. See also
Connecting auxiliary
components
above.
1 If the system isn’t already on, press
STANDBY/
ON
to switch on.
Also make sure that the external source (TV, satellite
receiver, etc.) is switched on.
2 Select DVD/DVR1, DVD/DVR2, DIGITAL or ANALOG
to select the source for playback.
These buttons correspond with the input jacks on the
receiver subwoofer.
3 If necessary, start playback of the external source.
Connecting external antennas
For an external AM antenna, use 5 to 6 meters of vinyl-
insulated wire and set up either indoors or outdoors.
Leave the loop antenna connected.
For an external FM antenna, use a PAL connector to hook
up an external FM antenna.
SYSTEM CONNECTOR
AC IN
CONTROL IN
CONTROL
USE ONLY WITH DISPLAY UNIT.
SEE INSTRUCTION MANUAL.
OUT
SUBWOOFER
CENTER FRONT
SURROUND
DVD/DVR1
(COAXIAL)
DVD/DVR2
(OPTICAL)
DIGITAL
(OPTICAL)
SPEAKERS
DIGITAL
AUDIO INPUT
ANALOG
RL
RL
R
L
AM LOOP ANTENNA
ANTENNA
FM UNBAL 75
MCACC
SETUP MIC
DVD player, etc.
To digital audio
output (coaxial)
To digital audio
output (optical)
or
DVD/DVR2
(OPTICAL)
DIGITAL
(OPTICAL)
DIGITAL
AUDIO INPUT
DVD/DVR1
(COAXIAL)
VOLUME
STANDBY/ON
MUTE
FM/AM
STANDBY/ON
DVD/DVR1 DVD/DVR2
ANALOGDIGITAL
MCACC
SETUP MIC
SYSTEM CONNECTOR
AC IN
CONTROL IN
CONTROL
USE ONLY WITH DISPLAY UNIT.
SEE INSTRUCTION MANUAL.
OUT
SUBWOOFER
CENTER FRONT
SURROUND
DVD/DVR1
(COAXIAL)
DVD/DVR2
(OPTICAL)
DIGITAL
(OPTICAL)
SPEAKERS
DIGITAL
AUDIO INPUT
ANALOG
RL
RL
R
L
AM LOOP ANTENNA
ANTENNA
FM UNBAL 75
AM LOOP ANTENNA
ANTENNA
FM UNBAL 75
Outdoor antenna
external FM antenna external AM antenna
Loop antenna
PAL connector
(5 m to 6 m)
Indoor antenna
(vinyl-coated Wire)
HTP-330.book 23 ページ 2007年3月27日 火曜日 午後6時8分