Filter
Top Products
Specifications
General
Ratedpower source ...............14.4 V DC
(allowable voltagerange:
12.0 14.4 VDC)
Grounding system...................Negativetype
Max. currentconsumption
.....................................................10.0 A
Dimensions (W× H× D):
DIN
Chassis .....................178 × 50 × 157 mm
Nose...........................188 × 58 × 20 mm
D
Chassis .....................178 × 50 × 162 mm
Nose...........................170 × 46 × 15 mm
Weight ..........................................1.3 kg
Audio
Continuous poweroutput is22 Wper channelminimum
into 4ohms, bothchannels driven50 to15000Hz with
no morethan 5%THD.
Maximum poweroutput.......50 W × 4
50 W× 2/4W+70W×1/2
W (forsubwoofer)
Load impedance ......................4 8W ×4
4 8W ×2+2W ×1
Preoutmax outputlevel/output impedance
.....................................................2.2 V/1 kW
Equalizer (3-BandParametric Equalizer):
Low
Frequency................40/80/100/160 Hz
Q Factor ....................0.35/0.59/0.95/1.15 (+6 dB
when boosted)
Gain ............................±12dB
Mid
Frequency................200/500/1k/2k Hz
Q Factor ....................0.35/0.59/0.95/1.15 (+6 dB
when boosted)
Gain ............................±12dB
High
Frequency................3.15k/8k/10k/12.5k Hz
Q Factor ....................0.35/0.59/0.95/1.15 (+6 dB
when boosted)
Gain ............................±12dB
Loudness contour:
Low .......................................+3.5 dB (100 Hz), +3 dB (10
kHz)
Mid .......................................+10 dB (100 Hz), +6.5 dB
(10 kHz)
High .....................................+11 dB (100 Hz), +11 dB
(10 kHz)
(volume: 30 dB)
HPF:
Frequency..........................50/63/80/100/125 Hz
Slope ....................................12dB/oct
Subwoofer:
Frequency..........................50/63/80/100/125 Hz
Slope ....................................18dB/oct
Gain ......................................+6 24dB
Phase ..................................Normal/Reverse
Bass boost:
Gain ......................................+12 0dB
CD player
System ..........................................Compact disc audiosystem
Usable discs ..............................Compact disc
Signal format:
Sampling frequency .....44.1 kHz
Number ofquantization bits
...........................................16; linear
Frequency characteristics ...5 20000Hz (±1 dB)
Signal-to-noise ratio ...............94 dB (1 kHz) (IEC-A net-
work)
Dynamic range .........................92 dB (1 kHz)
Number ofchannels ..............2 (stereo)
MP3 decodingformat ...........MPEG-1& 2Audio Layer3
WMA decodingformat .........Ver. 7, 7.1, 8, 9, 10 (2ch
audio)
(Windows MediaPlayer)
WAVsignal format..................Linear PCM& MSADPCM
FM tuner
Frequency range ......................87.5 108.0MHz
Usable sensitivity.....................8 dBf (0.7 µV/75 W, mono,
S/N: 30dB)
50 dBquieting sensitivity.....10 dBf (0.9 µV/75 W, mono)
Signal-to-noise ratio ...............75 dB (IEC-A network)
Distortion .....................................0.3 % (at 65 dBf, 1 kHz,
stereo)
0.1 %(at 65dBf,1 kHz,
mono)
Frequency response ...............30 15000 Hz(±3 dB)
Stereo separation ....................45 dB (at 65 dBf, 1 kHz)
AM tuner
Frequency range ......................531 1602 kHz (9kHz)
530 1640kHz (10 kHz)
Usable sensitivity.....................18 µV (S/N: 20 dB)
Signal-to-noise ratio ...............65 dB (IEC-A network)
Infrared remote control
Wavelength.................................940 nm ±50 nm
Output ...........................................typ; 12 mw/sr per Infrared
LED
Note
Specifications and the designare subject to pos-
sible modifications withoutnotice due to im-
provements.
Additional Information
En
45
English
Appendix