Filter
Top Products
Playing a CD
2
1
3
These are the basic steps necessary to play a
CD with your built-in CD player. More ad-
vanced CD operation is explained starting on
the next page.
1 EQindicator
Shows which equalizer curve is selected.
2 Playtime indicator
Shows the elapsed playing time of the cur-
rent track.
3 Track number indicator
Shows the track currently playing.
1 Press OPEN to open the front panel.
CD loading slot appears.
# After a CD has beeninserted, press SOURCE
to select the built-inCD player.
2 Insert a CD into the CD loading slot.
Playback will automatically start.
CD loadingslot
EJECT button
# You caneject a CD by pressing EJECT.
# To avoid a malfunction, makesure that no
metal object comesinto contact with the term-
inals when the frontpanel is open.
3 Close the front panel.
4 Use VOLUME to adjust the sound level.
Rotate it to increase or decrease the volume.
5 To perform fast forward or reverse,
press and hold c or d.
# If you select ROUGH, pressing and holdingc
or d enables youto search every 10 tracks in the
current disc. (Refer to Selectingthe search meth-
od on page 15.)
6 To skip back or forward to another
track, press c or d.
Pressing d skips to the start of the next track.
Pressing c once skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
Notes
! The built-in CD playerplays one standard, 12-
cm or 8-cm CDat a time. Do not usean adap-
ter when playing 8-cm CDs.
! Do not insert anythingother than a CD into
the CD loading slot.
! If you cannot insert adisc completely or if
after you insert a disc the discdoes not play,
check that the labelside of the disc is up.
Press EJECT to ejectthe disc, and check the
disc for damage beforeinserting it again.
! If an error messagesuch as ERROR-11 is dis-
played, refer to Understanding built-inCD
player error messages on page39.
! When a CD TEXTdisc is inserted, the disc and
track titles begin to scroll to the left auto-
matically.
Built-in CD Player
En
13
English
Section
05