Filter
Top Products
Introduction of advanced
built-in CD player (MP3/
WMA/WAV) operation
2
1
1 Functiondisplay
Shows the function status.
2 RPTindicator
Shows when repeat range is selected to cur-
rent track (file).
% Press FUNCTION to display the function
names.
Press FUNCTION repeatedly to switch be-
tween the following functions:
RPT (repeat play)RDM (random play)
SCAN (scan play)PAUSE (pause)COMP
(compression and BMX)FF/REV (search
method)
# To return to the playbackdisplay, press BAND.
Note
If you do not operatethe function within about 30
seconds, the displayis automatically returned to
the playback display.
Repeating play
For MP3/WMA/WAV playback, there are three
repeat play ranges: FLD (folder repeat), TRK
(one-track repeat) and DSC (repeat all tracks).
1 Press FUNCTION to select RPT.
Press FUNCTION until RPT appears in the dis-
play.
2 Press c or d to select the repeat range.
Press c or d until thedesired repeat range ap-
pears in the display.
! FLD Repeat the currentfolder
! TRK Repeat just thecurrent track
! DSC Repeat all tracks
Notes
! If you select another folder duringrepeat play,
the repeat play rangechanges to DSC.
! If you perform track search or fast forward/re-
verse during TRK, the repeat playrange
changes to FLD.
! When FLD is selected,it is not possible to play
back a subfolder ofthat folder.
! When you selectFLD for the repeating range
and return tothe playback display, FRPTis dis-
played.
Playing tracks in random order
Random play lets you play back tracks in a
random order within the repeat range, FLD
and DSC.
1 Select the repeat range.
Refer to Repeating play on this page.
2 Press FUNCTION to select RDM.
Press FUNCTION until RDM appears in the
display.
3 Press a to turn random play on.
RDM:ON appears in the display. Tracks will
play in a random order within the previously
selected FLD or DSC ranges.
MP3/WMA/WAV Player
En
20
Section
06