Filter
Top Products
Listening to the radio
4
1
2
3
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on the next page.
1 Bandindicator
Shows which band the radio is tuned to, AM
or FM.
2 Frequencyindicator
Shows the frequency to which the tuner is
tuned.
3 Presetnumber indicator
Shows which preset has been selected.
4 Stereo(5) indicator
Shows when the selected frequency is
being broadcast in stereo.
1 Press SOURCE to select the tuner.
Press SOURCE until you see TUNER dis-
played.
2 Use VOLUME to adjust the sound level.
Rotate it to increase or decrease the volume.
3 Press BAND to select a band.
Press BAND until the desired band (FM1,
FM2, FM3 for FM or AM) is displayed.
4 To perform manual tuning, briefly press
c or d.
The frequencies move up or down step by
step.
5 To perform seek tuning, press and hold
c or d for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
# You cancancel seek tuning by brieflypressing
c or d.
# If you press and holdc or d you can skipsta-
tions. Seek tuning startsas soon as you release
the button.
Note
When the frequencyselected is being broadcast
in stereo the stereo(5) indicator will light.
Tuner
En
10
Section
04