Filter
Top Products
Introduction of audio
adjustments
5
4
3
1
2
1 Audiodisplay
Shows the audio adjustment status.
2 CUSTOMindicator
Shows when custom equalizer curve is cur-
rently selected.
3 FIEindicator
Shows when the front image enhancer is
turned on.
4 SWindicator
Shows when the subwoofer output is turned
on.
5 Loudnessindicator
Appears in the display when loudness is
turned on.
% Press AUDIO to display the audio func-
tion names.
Press AUDIO repeatedly to switch between
the following audio functions:
FAD (balance adjustment)EQ (equalizer
curve adjustment)LOUD (loudness)
SUB W (subwoofer on/off setting)80: 0
(subwoofer setting)HPF (high pass filter)
BASS (bass boost)FIE (front image enhan-
cer)SLA (source level adjustment)
# When the subwoofercontroller setting is
P/O:FUL, youcannot switch to SUB W. (Refer to
page 36.)
# You canselect the 80: 0 onlywhen subwoofer
output is turned onin SUB W.
# When selecting theFM tuner as the source,
you cannot switchto SLA.
# To return to the displayof each source, press
BAND.
Note
If you do not operatethe audio function within
about 30 seconds,the display is automatically re-
turned to the sourcedisplay.
Using balance adjustment
You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
1 Press AUDIO to select FAD.
Press AUDIO until FAD appears in the display.
# If the balance settinghas been previously ad-
justed, BAL willbe displayed.
2 Press a or b to adjust front/rear speak-
er balance.
Each press of a or b moves the front/rear
speaker balance towards the front or the rear.
FAD:F15 FAD:R15 is displayed as the front/
rear speaker balance moves from front to rear.
# FAD: 0 is theproper setting when only two
speakers are used.
# When the rear outputsetting is R-SP:S/W,
you cannot adjust front/rearspeaker balance.
Refer to Settingthe rear output and subwoofer
controller on page 36.
3 Press c or d to adjust left/right speaker
balance.
When you press c or d, BAL: 0 is displayed.
Each press of c or d moves the left/right
speaker balance towards the left or the right.
BAL: L15 BAL: R15 is displayed as the left/
right speaker balance moves from left to
right.
Audio Adjustments
En
30
Section
08