Filter
Top Products
42
En
List of MIDI Messages
SW Name
SW
Type
MIDI Messages
Notes
MSB
JOG (TOUCH) — Bn 10 dd
A linear value corresponding
to the speed, from stop to 4X:
64 for stop, 65 (0.06X) – 127
(4X) in the forward direction,
63 (0.06X) – 0 (4X) in the
reverse direction.
TEMPO
SLIDER
VR Bn 1D dd
0 – 127, 0 on the – side, 127 on
the + side
TOUCH/
BRAKE
VR Bn 1E dd
0 – 127, 0 (min.) on the left
side, 127 (max.) on the right
side
RELEASE/
START
VR Bn 1F dd
0 – 127, 0 (min.) on the left
side, 127 (max.) on the right
side
JOG RING — Bn 30 dd
A linear value corresponding
to the speed from 0.5X to
4X: 64 when stopped (under
0.49X), 65 (0.5X) to 127 (4X)
in the forward direction, 63
(0.5X) to 0 (4X) in the reverse
direction.
ENCODER
General
Purpose
Controller
Bn 4F dd
98 – 127, 1 – 30 Difference of
count from previous time is
sent (±1 – ±30) When over
±30, set at ±30
PLAY/PAUSE SW 9n 00 dd OFF=0, ON=127
CUE SW 9n 01 dd OFF=0, ON=127
SEARCH
FWD
SW 9n 02 dd OFF=0, ON=127
SEARCH REV SW 9n 03 dd OFF=0, ON=127
TRACK
SEARCH
NEXT
SW 9n 04 dd OFF=0, ON=127
TRACK
SEARCH
REV
SW 9n 05 dd OFF=0, ON=127
LOOP IN SW 9n 06 dd OFF=0, ON=127
LOOP OUT SW 9n 07 dd OFF=0, ON=127
RELOOP SW 9n 08 dd OFF=0, ON=127
QUANTIZE SW 9n 09 dd OFF=0, ON=127
MEMORY SW 9n 0A dd OFF=0, ON=127
CALL NEXT SW 9n 0B dd OFF=0, ON=127
CALL PREV SW 9n 0C dd OFF=0, ON=127
DELETE SW 9n 0D dd OFF=0, ON=127
TIME/A.CUE SW 9n 0E dd OFF=0, ON=127
TEMPO
RANGE
SW 9n 10 dd OFF=0, ON=127
MASTER
TEMPO
SW 9n 11 dd OFF=0, ON=127
JOG MODE SW 9n 12 dd OFF=0, ON=127
HOT CUE A SW 9n 18 dd OFF=0, ON=127
HOT CUE B SW 9n 19 dd OFF=0, ON=127
HOT CUE C SW 9n 1A dd OFF=0, ON=127
HOT CUE
REC/CALL
SW 9n 1C dd OFF=0, ON=127
TEMPO
RESET
SW 9n 1D dd OFF=0, ON=127
MASTER SW 9n 1E dd OFF=0, ON=127
SYNC SW 9n 1F dd OFF=0, ON=127
JOG TOUCH SW 9n 20 dd OFF=0, ON=127
REVERSE SW 9n 21 dd OFF=0, ON=127
LOOP MODE SW 9n 2A dd OFF=0, ON=127
SLIP SW 9n 2C dd OFF=0, ON=127
EJECT SW 9n 2F dd OFF=0, ON=127
TAG TRACK SW 9n 30 dd OFF=0, ON=127
SW Name
SW
Type
MIDI Messages
Notes
MSB
BACK SW 9n 32 dd OFF=0, ON=127
ENCODER
PUSH
SW 9n 33 dd OFF=0, ON=127
NEEDLE
Touch
Sensor
Bn 1C dd
OFF = 0 1 to 127 position data
from left to right side
n is the channel number.