Filter
Top Products
20
En
Main unit display
Normal playback screen
7
6
5
4
3
2
1
j
i
h
g
f
e
d
c
9
a b8
lk
m
1 CUE
The positions of cue points, loop points and hot cues are displayed
as marks.
2 MEMORY
Cue points, loop points and hot cues stored on storage devices (SD,
USB) are displayed as marks.
3 A. CUE
This lights when auto cue is set.
= Setting auto cue (p.26)
4 PLAYER
This indicates the player number (1 – 4) assigned to this unit.
5 TRACK
This indicates the track number (01 – 99).
6 REMAIN
This lights when the time display is set to the remaining time.
7 Information display section
The enlarged waveform analyzed with rekordbox, etc., is displayed
here.
8 Track name
9 PHASE METER
This indicates the amount of divergence of the bars and beats with
the master player when using the beat sync function.
a BEAT COUNTDOWN
This indicates the number of bars or beats from the currently playing
position to the nearest stored cue point.
b KEY
Indicates the track’s key.
c ZOOM and GRID ADJUST mode display
When the rotary selector is pressed for over 1 second, the mode
switches between the [ZOOM] mode and the [GRID ADJUST] mode.
! [ZOOM] mode: When the rotary selector is turned, the waveform
is enlarged or reduced in 5 steps.
! [GRID ADJUST] mode: When the rotary selector is turned, the
beat grid is adjusted.
The beat grid can be adjusted using the [MENU/UTILITY] button.
— [reset]: Resets the adjusted beat grid.
— [snap grid (CUE)]: Moves the first beat to the position of the
currently set cue.
— [SHIFT GRID]: Reflects the results adjusted during synchroni-
zation (pitch bend, etc.) on the beat grid.
d NEEDLE
This lights when needle searching is possible.
e Time display (minutes, seconds and frames)
There are 75 frames to a second.
f QUANTIZE
This is displayed when [QUANTIZE] is on.
g MT
This lights when the master tempo is set.
= Adjusting the playing speed without changing the pitch (Master
Tempo) (p.24)
h BPM
Displays BPM (Beats Per Minute) of the track currently being played.
! The BPM measured by this unit may differ from the BPM indi-
cated on the disc or that of a Pioneer DJ mixer, etc. This is due to
the different methods used for measuring the BPM, and is not a
malfunction.
i Playing speed display
The value changes according to the position of the [TEMPO] slider.
j Playing speed adjustment range display
This indicates the range in which the playing speed can be adjusted
with respect to the original playing speed recorded on the medium.
k WAVE display
This displays the WAVE display, guidance, etc.
l Playing address display/scale display (1-minute
intervals)
The track is displayed as a bar graph. The current playback posi-
tion is displayed as a white vertical line. When the elapsed time is
displayed, the left edge of the graph lights. When the remaining time
is displayed, the display turns off from the left side. The entire graph
flashes slowly when there are less than 30 seconds remaining in
the track, then begins flashing rapidly when less than 15 seconds
remain.
m Cache meter
This indicates how much of the currently playing track is cached in
the memory.