Pioneer CDJ-200 CD Player User Manual


 
OPERATIONS / UTILISATION
23
<DRB1376>
En/Fr
English
Français
JET
Changes the delay time in response to rotation of the jog dial, and
adds a short delay sound to the original, thereby causing an interfer-
ence between the sounds and creating a swooshing effect.
The delay time corresponds to the jog dials rotation and changes
between 0 ms (when jog dial is completely stopped) to a maxi-
mum of 3 ms.
When the jog dial is rotated continuously, the delay time repeti-
tively changes between 03 ms.
When rotation of the jog dial stops, the sound will gradually settle
back to the original sound.
The setting is canceled when the disc is ejected.
ZIP
Changes the pitch in response to the turning of the jog dial, thereby
changing the playback sound.
The pitch change corresponds to the turning of the jog dial; when
the jog dial is stopped the pitch change is 0 %. When the jog dial is
turned clockwise, the pitch changes within the maximum of 100 %
(1 octave higher than the original sound). When the jog dial is
turned counterclockwise, the pitch changes within the maximum
of 1500 % (15 octaves lower than the original sound, a non-audi-
ble frequency).
When rotation of the jog dial stops, the sound will gradually settle
back into the original sound.
The setting is canceled when the disc is ejected.
If the HOLD function is turned ON and the setting is made in the
minus direction, when the HOLD function is next turned ON again,
the break effect will be produced.
WAH
Adds a 12 dB/octave filter with cutoff frequency that changes in re-
sponse to jog dial rotation.
The filter changes into a maximum 4 kHz high-pass filter when the
jog dial is turned clockwise; the filter changes into a minimum 150
Hz low-pass filter when the jog dial is turned counterclockwise.
When rotation of the jog dial stops, the sound gradually returns to
the original sound.
The setting is canceled when the disc is ejected.
[HOLD function]
Used to maintain the effect that has been created by the turning of
the jog dial even after the jog dials rotation is stopped.
Press the HOLD button during usage of Digital Jog Break
function.
The [JET], [ZIP], or [WAH] indicator in the display stops flashing
and lights steadily, and the effect created at that point is main-
tained so that the jog dials turning can be stopped.
When the Time Mode is selected and HOLD function is turned on,
a HOLD indicator ([JET-HOLD], [ZIP-HOLD], [WAH-HOLD]) will be
shown in intervals in the section where the time is displayed.
When TEXT mode is selected, this will not be displayed.
When the HOLD function is turned ON, even if another effect is
selected, the setting prior to the new effect selection will be pre-
served in memory so long as hold is not turned off.
JET
Cet effet change la durée du retard, en réponse à la rotation de la
bague Jog; il ajoute un léger retard au son original, ce qui provoque
une interférence entre les sons et crée un effet swoosh.
La durée du retard correspond à la rotation de la bague Jog; elle
change entre 0 ms (la bague Jog étant totalement à larrêt) et 3 ms
au maximum.
Si la bague Jog est tournée de façon continue, la durée du retard
change de façon répétée entre 0 et 3 ms.
Si vous arrêtez de tourner la bague Jog, le son revient progre-
ssivement au son original.
Le réglage est annulé lorsque le disque est éjecté.
ZIP
Cet effet change la hauteur tonale en réponse à la rotation de la
bague Jog et il modifie ainsi le son reproduit.
La hauteur tonale change selon la rotation de la bague Jog.
Lorsquelle est arrêtée, le changement de hauteur tonale est 0 %.
Si la bague est tournée dans le sens horaire, la hauteur tonale
change de 100 % au maximum (1 octave plus haut que le son
original). Si la bague est tournée dans le sens antihoraire, la hau-
teur tonale change de 1500 % au maximum (15 octaves plus bas
que le son original, une fréquence non audible).
Si vous arrêtez de tourner la bague Jog, le son revient progre-
ssivement au son original.
Le réglage est annulé lorsque le disque est éjecté.
Si la fonction HOLD est activée et que le réglage est effectué dans
le sens Moins, leffet break sera produit lorque la fonction HOLD
sera à nouveau activée.
WAH
Cet effet ajoute un filtre de 12 dB/octave avec une fréquence de
coupure variant selon la rotation de la bague Jog.
Le filtre change en un filtre passe-haut de 4 kHz maximum lorsque
la bague Jog est tournée dans le sens horaire. Il change en un
filtre passe-bas de 150 Hz lorsque la bague Jog est tournée dans le
sens antihoraire.
Si vous arrêtez de tourner la bague Jog, le son revient progre-
ssivement au son original.
Le réglage est annulé lorsque le disque est éjecté.
[Fonction HOLD] (maintien)
Cette fonction permet de maintenir leffet, créé par la rotation de la
bague Jog, même après que cette rotation est arrêtée.
Appuyez sur le bouton HOLD pendant lemploi de la fonction
Coupure par Joig numérique.
Le voyant [JET], [ZIP] ou [WAH] cesse de clignoter sur laffichage
et il reste allumé. Leffet créé à ce point est maintenu, de sorte que
vous pouvez arrêter de tourner la bague Jog.
Lorsque le Mode Horaire est choisi et que la fonction HOLD est
activée, un voyant HOLD (c.à.d. [JET-HOLD], [ZIP-HOLD] ou
[WAH-HOLD]) apparaît à intervalles à lendroit où le temps est
affiché. Si le Mode Texte est choisi, ce voyant nest pas affiché.
Si la fonction HOLD est activée, même si un autre effet est
sélectionné, le réglage effectué avant cette nouvelle sélection
deffet sera maintenu en mémoire tant que la fonction HOLD nest
pas désactivée.