Pioneer CDJ-200 CD Player User Manual


 
BEFORE OPERATING (PANEL FACILITIES) / AVANT LA MISE EN SERVICE (DESCRIPTION DES ORGANES)
13
<DRB1376>
En/Fr
English
Français
13. TEMPO control slider
Controls the tracks tempo (playback speed). (P.22)
14. Jog dial (REV/+FWD)
15. Jog indicator
When no disc is inserted, the indicator is turned off.
When disc is inserted and in normal mode, indicator is
turned on.
When the Digital Jog Break is ON, indicator flashes rapidly.
When Digital Jog Break is in HOLD ON mode, indicator
flashes slowly.
16. Disc indicator
Located on the front panel of the unit.
When no disc is inserted, the indicator is turned on.
When disc is loading and unloading, indicator flashes.
When disc loading is completed, indicator turns off.
17. Disc loading slot
Located in front panel. (P.16)
18. Forced ejection hole
Located in front panel of the unit. (P.16)
19. PLAY/PAUSE button (6)
(P.18)
20. PLAY/PAUSE indicator (6)
Lights when playing, and turns off when in pause mode.
21. CUE button
Use to set and confirm cue point. (P.24)
22. CUE indicator
Lights when cue point is set, and turns off when in pause
mode.
23. SEARCH buttons (1, ¡)
Use to perform fast-forward and fast-reverse (with sound)
during playback mode. (P.20)
24. TRACK SEARCH buttons (4, ¢)
Changes tracks in the forward/reverse direction. (P.20)
25. FOLDER SEARCH buttons (+, =)
When using a CD-ROM with folder layers, use to change fold-
ers in the forward/reverse direction. (P.21)
26. LOOP buttons
7 IN/REALTIME CUE/HOT LOOP button/indicator
Use to input loop-in point. (IN P.26)
Use to set the current playback point as cue point. (REALTIME
CUE P.24)
When pressed during loop play, returns playback to loop-in
point and begins replay. (HOT LOOP P.27)
7 OUT/OUT ADJUST button/indicator
Use to input loop-out point. (OUT P.27)
When pressed during loop play, adjusts loop-out point. (OUT
ADJUST P.27)
7 RELOOP/EXIT button
After finishing loop play, the stored loop-in/out information
can be used to begin loop play again. (RELOOP P.27)
When pressed during loop play, loop play stops and playback
returns to normal playback mode. (EXIT P.27)
7 BEAT LOOP/LOOP CUTTER button
When pressed during play or pause modes, the loop end is
automatically set based on the tracks BPM (Beat Per Min-
utes), and loop play starts. (BEAT LOOP P.27)
When pressed during loop play, the length of the loop is cut to
half its length. (LOOP CUTTER P.27)
27. DIGITAL JOG BREAK buttons
Turns each sound effect ON/OFF: JET, ZIP, WAH. (P.22)
12. Voyant BEAT LOOP
Il sallume au point initial de boucle pendant la lecture en
boucle.
13. Curseur de commande TEMPO
Il contrôle le tempo (vitesse de lecture) de la plage. (p. 22)
14. Bague Jog (REV/+FWD)
15. Voyant Jog
Il reste éteint si aucun disque nest inséré.
Il sallume quand un disque est inséré et est en mode normal.
Il clignote rapidement quand Coupure par Jog numérique
est activé.
Il clignote lentement quand Coupure par Jog numérique
est en mode HOLD ON.
16. Voyant de disque
Situé sur le panneau avant de lappareil.
Il sallume si aucun disque nest inséré.
Il clignote pendant le chargement ou le déchargement du
disque.
Il s’éteint quand le chargement dun disque est terminé.
17. Fente de chargement du disque
Elle se trouve sur le panneau avant. (p. 16)
18. Orifice d’éjection forcée
Il se trouve sur le panneau avant. (p. 16)
19. Bouton PLAY/PAUSE (6 )
(p. 18)
20. Voyant PLAY/PAUSE (6)
Il sallume à la lecture et s’éteint en mode Pause.
21. Bouton CUE
A utiliser pour poser ou confirmer un point de repérage.
(p. 24)
22. Voyant CUE
Il sallume quand un point de repérage est posé et s’éteint
en mode Pause.
23. Boutons SEARCH (1 , ¡)
Ils commandent lavance et le retour rapide (le son étant au-
dible) en mode de lecture. (p. 20)
24. Boutons TRACK SEARCH (4, ¢)
Pour passer à une autre plage vers lavant/arrière. (p. 20)
25. Boutons FOLDER SEARCH (+, =)
A lemploi dun CD-ROM à couches de dossier, il permet de
changer les dossiers dans le sens avant/arrière. (p. 21)
26. Boutons LOOP
7 Bouton/voyant IN/REAL TIME CUE/HOT LOOP
A utiliser pour la saisie du point initial de boucle. (IN p. 26)
Il permet de fixer le point de lecture actuel comme point de
repérage. (REALTIME CUE p. 24)
Sa pression pendant la lecture à boucle fait revenir au point ini-
tial de boucle et la lecture y recommence. (HOT LOOP p. 27)
7 Bouton/voyant OUT/OUT ADJUST
A utiliser pour la saisie du point final de boucle. (OUT p. 27)
Sa pression pendant la lecture à boucle permet dajuster le
point final de boucle. (OUT ADJUST p. 27)
7 Bouton RELOOP/EXIT
A la fin de la lecture à boucle, linformation mémorisée du
point initial/final peut servir pour recommencer la lecture à
boucle. (RELOOP p. 27)
Si ce bouton est actionné pendant la lecture à boucle, celle-ci
sarrête et la lecture repasse au mode normal. (EXIT p. 27)