Pioneer CDJ-200 CD Player User Manual


 
OPERATIONS / UTILISATION
19
<DRB1376>
En/Fr
English
Français
When playing MP3s, after the playback of all the tracks inside a
folder has finished, the unit will enter the standby mode at the end
of the final track. When the PLAY/PAUSE button (6) is pressed,
playback will begin from the first track of the same folder.
Resume Function
When the same disc is inserted after being ejected once, the disc will
be restarted from the place immediately before the disc was ejected.
However, the Digital Jog Break function will not be restored. If de-
sired, the TRACK SEARCH button can be pressed before playback
begins to perform normal track search and playback.
If the disc is protruding from the disc loading slot, pressing the EJECT
button (0) will cause the resume function to be canceled.
To Stop Playback
1. Press the EJECT button (0).
Playback will stop and the disc will be ejected.
The CDJ-200 is not provided with a conventional stop button.
In the event the EJECT button (0) is pressed accidentally, im-
mediately (before [EJECT] is displayed in the display) press the
PLAY/PAUSE button (6) to cancel the eject command; play-
back will then restart from the place immediately before the
EJECT button (0) was pressed (during this time, sound output
will be temporarily interrupted).
To Temporarily Interrupt Playback
Press the PLAY/PAUSE button (6) during playback.
The PLAY/PAUSE button (6) indicator and the CUE button indi-
cator will flash and playback will be paused.
When the PLAY/PAUSE button (6) is pressed again, the indica-
tor on the button will light and the playback will continue.
Broken sound will still be audible during the pause mode; to stop
all sound, lower the output sound volume of the audio mixer.
If there has not been any operation for more than 100 minutes in
the pause mode, the disc rotation will automatically be stopped.
By pressing the PLAY/PAUSE button (6), the playback will be
resumed from the first track.
Jog Dial Functions
[Pitch Bend]
Rotate dial during play.
The track will accelerate (FWD+ =Clockwise)/slowdown (REV
=Counter-Clockwise) according to the amount and direction
the jog dial is turned. The rate of change is up to ±20 % (essen-
tially linear change).
When jog dial rotatation stops, the speed returns to the speed
before the jog dial was first rotated.
Pitch Bend is disabled when the Digital Jog Break function is
turned ON.
[Frame Search]
Rotate dial during pause.
Moves audible pause position in frame units.
Searches frames in the play direction when rotated clockwise,
and the reverse direction when rotated counter-clockwise.
48 frames are searched in one full cycle of the jog dial.
[Cue point adjust]
P.24 Changing the cue point
[Super-Fast Search]
P.20 Super-Fast search
[Super-Fast track search]
P.21 Super-Fast track search
[Super-Fast folder search]
P.21 Super-Fast folder search
[Digital Jog Break]
P.22 Digital Jog Break
Reprise de la lecture
Si le même disque est réintroduit après avoir été éjecté, sa lecture
recommence à lendroit juste avant celui où il avait été éjecté.
Cependant, la fonction Coupure à Jog numérique ne sera pas pas
restaurée. Au besoin, le bouton TRACK SEARCH peut être actionnée
avant le début de la lecture pour effectuer la recherche normale de
plage et la lecture.
Si le disque fait saillie hors de la fente de chargement, une poussée
sur le bouton EJECT (
0
) annulera la fonction de reprise.
Arrêt de la lecture
1. Appuyez sur le bouton EJECT (0).
La lecture sarrête et le disque est éjecté.
Le CDJ-200 nest pas muni dun bouton darrêt traditionnel.
Si le bouton EJECT (0) est actionné par erreur, appuyez
immédiatement (avant que [EJECT] napparaisse sur
laffichage) sur le bouton PLAY/PAUSE (6) pour annuler la
commende d’éjection. La lecture reprend alors à lendroit juste
avant que le bouton EJECT (0) avait été actionné (pendant ce
temps, la sortie sonore sera temporairement interrompue).
Interruption temporaire de la lecture
Appuyez sur le bouton PLAY/PAUSE (6) pendant la lecture.
Le voyant du bouton PLAY/PAUSE (6) et celui du bouton CUE
clignotent et la lecture est interrompue.
Si le bouton PLAY/PAUSE (6) est actionné à nouveau, le voyant
du bouton reste allumé et la lecture se poursuit.
Des sons interrompus restent audibles pendant la pause; pour
couper tous les sons, abaissez le volume sonore de sortie sur la
table de mixage audio.
Si aucune opération nest effectuée pendant plus de 100 minutes
en mode Pause, la rotation du disque est automatiquement
arrêtée. Appuyez alors sur le bouton PLAY/PAUSE (6) pour
reprendre la lecture à partir de la première plage.
Fonctions de la bague Jog
[Pitch Bend] (Changement de hauteur tonale)
Tournez la bague pendant la lecture.
La plage accélère (FWD+ = Rotation horaire) ou ralentit (REV- =
Rotation antihoraire) selon le degré et le sens de rotation de la
bague Jog. Le taux de changement va jusque ±20 % (un
changement essentiellement linéaire).
Lorsque la rotation de la bague Jog est arrêtée, la vitesse
revient à celle davant la rotation de la bague.
La fonction Pitch Bend est désactivée lorsque la fonction
Coupure par Jog numérique est activée.
[Recherche de cadre]
Tournez la bague pendant la pause.
Pour déplacer la position de pause audible en unités de cadres.
La recherche saccomplit dans le sens de la lecture lors dune
rotation en sens horaire et dans le sens inverse lors dune rota-
tion en sens antihoraire.
Un cycle complet de la bague Jog correspond à la recherche de
48 cadres.
[Réglage du point de repérage]
p. 24 Réglage dun point de repérage
[Recherche super rapide]
p. 20 Recherche super rapide
[Recherche super rapide de plage]
p. 21 Recherche super rapide de plage
[Recherche super rapide de dossier]
p. 21 Recherche super rapide de dossier
[Coupure par Jog numérique]
p. 22 Coupure par Jog numérique