Filter
Top Products
Controlling the rest of your system 09
55
En
English
Français
Deutsch
Nederlands
Italiano
Español
Chapter 9:
Controlling the rest of your
system
Setting the remote to control
other components
Most components can be assigned to one of
the MULTI CONTROL buttons using the
component’s manufacturer preset code stored
in the remote.
However, please note that there are cases
where only certain functions may be
controllable after assigning the proper preset
code, or the codes for the manufacturer in the
remote control will not work for the model that
you are using.
1
Note
• You can cancel or exit any of the steps by
pressing .
• After one minute of inactivity, the remote
automatically exits the operation.
Selecting preset codes directly
1 While pressing the button,
press and hold the ‘
1
’ button for three
seconds.
2 Press the
MULTI CONTROL
button for
the component you want to control.
The component can be assigned to the BD,
DVD, TV, DVR, CD, CD-R or VIDEO button.
• When assigning preset codes to TV
CONTROL, press INPUT here.
3 Use the number buttons to enter the
preset code.
You can find the preset codes on page 59.
If the correct code has been input the power of
the component being input will turn on or off.
The power of the component being input will
only turn on or off if that component is able to
be turned on directly by remote control.
4 Repeat steps 2 through 3 to try a different
code, or to enter a code for another
component you want to control.
5 When you’re done, press .
Note
1 TV CONTROL buttons are only dedicated to control the TV (for example, codes for TV, CATV, Satellite TV or DTV).
RECEIVER
BD DVD
INPUT SELECT
TV
INPUT
CH
DVR CD
CD-R
ADAPTER iPod USB
VIDEO
RECEIVER
DIMMER
1
4
7
MIDNIGHT
S.RETRIEVER
HDD
+
10
2
5
8
SPEAKERS
LEV
LEV
SB CH
DISP
CLR
MEMORY
EQ
PHASE
DVD
3
6
9
0
ENTER
CH
CH
CH SELECT
VCR
SHIFT
/
RECEIVER
RECEIVER
VSX-920_UCSMXCN_En.book 55 ページ ２０１０年１月２１日 木曜日 午前９時４３分