Pioneer 920 Stereo System User Manual


 
Controls and displays02
10
En
PRESET /
Use to select preset radio stations
(page 53) and to select SIRIUS Radio
channels (page 70).
8
MASTER VOLUME
dial
9
PHONES
jack
Use to connect headphones. When the
headphones are connected, there is no sound
output from the speakers (page 43).
10 Listening mode buttons
AUTO/DIRECT
Switches between Auto surround mode
(Auto playback on page 35) and Stream
Direct playback. Stream Direct playback
bypasses the tone controls for the most
accurate reproduction of a source
(page 38).
STEREO/ALC
Switches between stereo playback, Auto
level control stereo mode (page 37) and
Front Stage Surround Advance modes
(page 37).
STANDARD
Press for Standard decoding and to switch
between the various 2 Pro Logic II, 2 Pro
Logic IIx, 2 Pro Logic IIz and NEO:6
options (page 34).
ADV SURROUND
Switches between the various surround
modes (page 36).
11
iPod iPhone DIRECT CONTROL
Change the receiver’s input to the iPod and
enable iPod operations on the iPod (page 64).
12
iPod iPhone/USB
terminal
Use to connect your Apple iPod or USB mass
storage device as an audio source (page 62
and page 65).
13
AUDIO/VIDEO
input
See Connecting to the front panel video terminal
on page 30.
14
MCACC SETUP MIC
jack
Use to connect a microphone when
performing Auto MCACC setup.
Operating range of remote control
The remote control may not work properly if:
There are obstacles between the remote
control and the receiver’s remote sensor.
Direct sunlight or fluorescent light is
shining onto the remote sensor.
The receiver is located near a device that is
emitting infrared rays.
The receiver is operated simultaneously
with another infrared remote control unit.
30°
7 m (23 ft.)
30°
VSX-920_UCSMXCN_En.book 10 ページ 2010年1月21日 木曜日 午前9時43分