Filter
Top Products
The System Setup menu 06
49
En
English
Français
Deutsch
Nederlands
Italiano
Español
2 Select ‘Input Assign’ from the System
Setup menu.
3 Select ‘Component Input’ from the
Input Assign menu.
4 Select the number of the component
video input to which you’ve connected
your video component.
The numbers correspond with the numbers
beside the inputs on the rear of the receiver.
5 Select the component that corresponds
with the one you connected to that input.
Select between BD, DVD, TV, DVR or OFF.
•Use / and ENTER to do this.
• If you assign a component input to a
certain function, any component inputs
previously assigned to that function will
automatically be switched off.
• Make sure you have connected the audio
from the component to the corresponding
inputs on the rear of the receiver.
6 When you’re finished, press RETURN.
You return to the Input Assign menu.
• For the assignment of the digital signal
inputs, see Choosing the input signal on
page 43.
The Speaker System setting
Specify either using the surround back
speaker (or the speaker B), or the front height
speaker connection with the B-speaker
terminals.
•Default setting: Surr. Back
1 Press on the remote control,
then press the SETUP button.
An on-screen display (OSD) appears on your
TV. Use /// and ENTER on the remote
control to navigate through the screens and
select menu items. Press RETURN to confirm
and exit the current menu.
2 Select ‘Speaker System’ from the
System Setup menu.
3 Select the speaker system setting using
/.
• Surr. Back – Sound is output from the
surround back speaker or the speaker B.
• Height – Sound is output from front height
speaker.
4 When you’re finished, press RETURN.
You return to the System Setup menu.
System Setup
1.Auto MCACC
2.Manual SP Setup
3.Input Assign
4.Speaker System
5.Video Parameter
Return
3.Input Assign
Return
a.Component Input
3a.Component Input
Return
Component–1 BD
Component–2 [ DVD ]
RECEIVER
System Setup
1.Auto MCACC
2.Manual SP Setup
3.Input Assign
4.Speaker System
5.Video Parameter
Return
System Setup
1.Auto MCACC
2.Manual SP Setup
3.Input Assign
4.Speaker System
5.Video Parameter
Return
4.Speaker System
Return
SP System Surr. Back
VSX-920_UCSMXCN_En.book 49 ページ ２０１０年４月１２日 月曜日 午後４時４８分