Pioneer 915 Stereo Receiver User Manual


 
The System Setup menu
07
43
En
English
Français
Deutsch
Nederlands
Italiano
Español
Chapter 7:
The System Setup menu
Making receiver settings from
the System Setup menu
The following section shows you how to make
detailed settings to specify how you’re using
the receiver (for example, if you want to set up
two speaker systems in separate rooms), and
also explains how to fine-tune individual
speaker system settings to your liking.
1 If the receiver is off, press
RECEIVER
to turn the power on.
If headphones are connected to the
receiver, disconnect them.
2 Press
RECEIVER
on the remote control,
then press the SYSTEM SETUP button.
Press
SYSTEM SETUP
again at any time to
exit the System Setup menu.
3 Use
/
(cursor left/right) to select the
setting you want to adjust then press
ENTER
.
Press
RETURN
to confirm and exit the current
menu.
SB. SYSTEM
– Specify how you are using
your surround back speakers (see
Surround back speaker setting
below).
A. MCACC
– This is a quick and effective
automatic surround setup (see
Automatically setting up for surround
sound (MCACC)
on page 12).
M. MCACC
– Fine tune your speaker
settings and customize the Acoustic
Calibration EQ (see
Manual MCACC
speaker setup
below).
SP SETUP
– Specify the size, number,
distance and overall balance of the
speakers you’ve connected (see
Manual
speaker setup
on page 48).
IN ASSIG.
– Specify what you’ve connected
to the digital and component video inputs
(see
The Input Assign menu
on page 66).
OTHER
– Make customized settings to
reflect how you are using the receiver (see
The Other setup menu
on page 67).
Surround back speaker setting
Default setting:
SB NORM.
There are several ways you can use the
surround back speaker channels with this
system. In addition to a normal home theater
setup where they are used for the surround
back speakers, they can be used for bi-amping
the front speakers or as a separate speaker
system in another room.
1 Select ‘
SB. SYSTEM’
from the System
Setup menu.
See
Making receiver settings from the System
Setup menu
above.
2 Select the surround back speaker setting.
SB NORM.
– Select for normal home
theater use with surround back speakers in
your main (speaker system A) setup.
RECEIVER
MULTI CONTROL
SOURCE
INPUT
SELECT
DVD/LD TV/SAT DVR/VCR TV CONT
CD
CD-R/TAPE
TUNER RECEIVER
+
10
FL DIMMER SR
DISC
ENTER
TV CONTROL
VOL
ST ST
INPUT
SELECT
TV CH
TV VOL
ENTER
D.ACCESS
TOP MENU
DTV MENU
CLASS
MENU
BAND
RETURN
GUIDE
T.EDIT
SYSTEM
SETUP
TUNE
TUNE
VSX_815-915.book.fm 43 ページ 2004年12月8日 水曜日 午後4時3分