Filter
Top Products
Controls and displays05
28
En
7
PHONES
jack
Use to connect headphones. When the
headphones are connected, there is no sound
output from the speakers.
8
LISTENING MODE
buttons
STANDARD
Press for Standard decoding and to switch
between the various Pro Logic IIx and
Neo:6 options (page 34).
ADVANCED SURROUND
Use to switch between the various
surround modes
(page 35).
STEREO/DIRECT (AUTO SURR)
Switches between direct and stereo
playback. Direct playback bypasses the
tone controls and any other signal
processing for the most accurate
reproduction of a source (page 37). Also
selects the Auto Surround mode (
Auto
playback
on page 34).
9
SIGNAL SELECT
Use to select an input signal (page 38).
10
VIDEO INPUT
See
Connecting to the front panel video terminal
on page 21.
11 MCACC SETUP MIC jack
Use to connect the supplied microphone.
12
MASTER VOLUME
dial
13 FL DIMMER
Dims or brightens the display.
14 INPUT ATT
Attenuates (lowers) the level of an analog input
signal to prevent distortion.
15
SPEAKERS
Use to change the speaker system (page 62)
and to change the impedance setting
(page 72).
16
EXTENDED MODE
Selects the surround back channel mode
(page 39) or virtual surround back mode
(page 40).
17 ACOUSTIC EQ
Press to select an Acoustic Calibration EQ
setting (page 37).
18 BAND
Switches between the tuner AM and FM bands
(page 51).
19
TUNING / STATION
buttons
Selects the frequency (page 51) and station
presets (page 52) when using the tuner.
20
TUNER EDIT
Press to memorize and name a station for
recall
(page 52).
21
TONE
Press this button to access the bass and treble
controls, which you can then adjust with the
MULTI JOG
dial (page 41).
22
QUICK SETUP
See
Using the Quick Setup
on page 11.
23 System Setup menu controls
SYSTEM SETUP
Use with the
MULTI JOG
dial to access the
System Setup menu (page 11, page 43,
page 66).
RETURN
Press to confirm and exit the current
menu.
VSX_815-915.book.fm 28 ページ ２００４年１２月８日 水曜日 午後４時３分