Filter
Top Products
34
RQTV0141
Troubleshooting guide
Unit displays Page
Television displays
Using the cassette deck
Disc trays
Although the unit is on standby
mode, the display lights up and
changes continuously.
≥Turn off the demo function.
≥If you set the clock, demo function will be turned off automatically.
7
—
The display is dark. ≥Press and hold [jDIMMER] to brighten the display. 9
“NO PLAY” ≥You inserted a disc the unit cannot play; insert one that can.
≥You inserted a blank disc.
10
—
“NO DISC” ≥You have not inserted a disc; insert one.
≥You have not inserted the disc correctly; insert it correctly.
—
11
“F61” ≥Check and correct the speaker cord connections.
If this does not fix the problem, there is a power supply problem. Consult the
dealer.
5
“DVD U11” ≥Disc is dirty. Wipe it clean. 11
“ERROR” ≥Incorrect operation performed. Read the instructions and try again. —
“DVD H∑∑”
∑∑ stands for a number.
≥Trouble may have occurred. The number following “H” depends on the status
of the unit. Turn the unit off and then back to on. Alternatively, turn the unit off,
disconnect the AC power supply cord, and then reconnect it.
≥If the service numbers fail to clear, note the service number and contact a
qualified service person.
—
—
“This disc may not be played in
your region.”
≥You can only play DVD-Video if their region number is the same or includes the
same region number as the unit or if the DVD-Video is marked “ALL”. Confirm
the region number for the unit on the back of the main unit.
Cover
page
No on-screen display. ≥Select “On” in “On-Screen Messages” in the “Display” tab. 23
“/” ≥The operation is prohibited by the unit or disc. —
“Cannot display group xx,
content xx”
≥You are trying to display incompatible contents. —
“Check the disc” ≥This disc may be dirty. 11
“Authorization Error” ≥You are trying to play the DivX VOD content that was purchased with a
different registration code. You cannot play the content on this unit. [DivX]
31
“Rental Expired”
“Rented Movie Expired”
≥The DivX VOD content has zero remaining plays. You cannot play it. [DivX] 31
Poor quality sound. ≥Clean the heads. 11
Recording is not possible. ≥If the erasure prevention tabs have been removed, cover the holes with
adhesive tape.
25
Disc tray(s) cannot open.
“CHGR ERR” is displayed.
≥Press [Í/I] to release the jammed tray(s) as the unit will switch off. Switch it on
again and the tray(s) will initialise to the previous tray(s) condition.
≥If this still does not fix the problem, please consult the dealer.
11
—
Memory reset (Initialisation)
When the following situations occur, refer to the instructions below to reset the memory:
≥There is no response when buttons are pressed.
≥You want to clear and reset the memory contents.
To reset memory
1Disconnect the AC power supply cord. (Wait at least 3 minutes before proceeding to step 2.)
2While pressing and holding down [Í/I] on the main unit, reconnect the AC power supply cord.
“sssssssss” appears on the display.
3Release [Í/I].
All the settings are returned to the factory preset.
You will need to reset the memory items.
Troubleshooting guide
SC-VK650GCSGCTGN.book 34 ページ ２００６年４月１７日 月曜日 午後５時４７分