Filter
Top Products
33
RQTV0141
A-B repeat Page
Sound
Menus
Picture abnormal or unviewable
Progressive video
Listening to the radio
Point B is automatically set. ≥The end of an item becomes point B when it is reached. 20
Sound distorted. ≥Noise may occur when playing WMA. —
Effects do not work. ≥Some audio effects do not work or have less effects with some discs.
≥Advanced Surround do not work if you have changed the play speed.
—
—
Humming is heard during play. ≥An AC power supply cord or fluorescent light is near the cables. Keep other
appliances and cords away from this unit’s cables.
—
No sound. ≥There may be a pause in sound when you change the play speed.
≥Audio may not be output due to how files were created. [DivX]
20
10
The “Setup” menu cannot be
accessed.
≥Select “DVD/CD” as the source.
≥Cancel program and random play.
—
15
Picture distorted. ≥Some distortion is normal during SEARCH.
≥Ensure that the unit is connected directly to the television, and is not
connected through a video cassette recorder.
≥Change “Source Select” in “Picture Menu”. [DivX]
13
4
20
Picture size does not fit the
screen.
≥Change “TV Aspect” in the “Video” tab.
≥Change the zoom setting.
23
21
The television may display
incorrectly or colors appear
faded.
≥The unit and television are using different video systems.
– Use a multi-system or PAL television.
≥The system used on the disc does not match your television.
– PAL discs cannot be correctly viewed on an NTSC television.
– This unit can convert NTSC signals to PAL60 for viewing on a PAL
television (“NTSC Disc Output” in “Video” tab.)
≥Mobile telephone chargers can cause some disturbance.
≥If you are using a TV indoor antenna, change to an outdoor antenna.
≥The television antenna wire is too close to the unit. Separate the antenna wire
of the television from the unit.
—
—
23
—
—
—
Picture stops. [DivX] ≥Picture may stop if the DivX files are greater than 2 GB. —
Menu is not displayed correctly. ≥Restore the zoom ratio to “a1.00”.
≥Set “Subtitle Position” in “Display Menu” to “0”.
21
21
Auto zoom function does not
work well.
≥Turn off TV’s zoom function.
≥Use the other preset aspect ratios or manual adjustment.
≥Zoom function may not work well, especially in dark scenes and may not work
depending on the type of disc.
—
21
—
There is ghosting when
progressive output is on.
≥This problem is caused by the editing method or material used on DVD-Video,
but should be corrected if you use interlace output. Change “Video Output
Mode” in “Picture Menu” to “480i” or “576i”.
20
Pictures not in progressive
output.
≥Select “480p” or “576p” in “Video Output Mode” in “Picture Menu”.
≥If the unit is connected to the television through VIDEO OUT or S VIDEO OUT
terminal, output will be interlace even if “PRG” is displayed.
20
4
Noise is heard.
“ST” flickers or does not light.
Sound is distorted.
≥Adjust the position of the FM or AM antenna.
≥Use an outdoor antenna.
≥Press [PLAY MODE] to select “Mono”.
4, 5
4, 5
24
A beat sound is heard. ≥Turn the television off or separate it from the unit. —
A low hum is heard during AM
broadcasts.
≥Separate the antenna from other cables and cords. —
Troubleshooting guide
SC-VK650GCSGCTGN.book 33 ページ ２００６年４月１７日 月曜日 午後５時４７分