Philips MX5700D Home Theater System User Manual


 
35
English
IMPORTANT!
Make sure the FM and MW antennas
are connected.
The TUNING button on the front
panel is used to toggle between
frequency tuning and preset tuning.
When in preset tuning mode, pressing
S / T buttons on the front panel
will change the preset number.
Otherwise, pressing S / T will
change the radio frequency.
Tuning to radio stations
1 Press TUNER on the remote (or adjust
SOURCE control on front panel) to select
FM TUNER or MW TUNER.
2 Press and hold S / T on the remote
until the frequency indication starts to change,
then release.
The next radio station will tune
automatically.
lights up for FM stereo reception.
3 To tune a weak station, press S / T
briefly and repeatedly until an optimal
reception is found.
If you use S / T on the front panel for
frequency tuning, make sure the system is in
frequency tuning mode. If not, press
TUNING.
"FREQ MODE" appears.
Presetting radio stations
You can store up to 40 preset radio stations in
the memory, starting from FM and followed by
MW bands.
Notes:
The system will exit presetting mode if no
button is pressed within 20 seconds.
If no stereo frequency is detected during Plug
and Play, "CHECK ANTENNA" appears.
Using the Plug and Play
Plug and Play allows you to store all available
radio stations automatically.
DVD VIDEO DIGITAL SURROUND SYSTEM
STOPPLAYPAUSE SEATING
TREBL
BASS
SOURCE
VOLUME
PROG TUNING CLOCKTIMER
SURROUND
SEARCH
SC CHANGER
EJECT
MEDIA SLOT
DVD
D
I
S
C
S
U
R
-
R
R
I
G
H
T
C
E
N
T
R
E
L
E
F
T
S
U
B
S
U
R
-
L
PLAYPAUSE
AUTO INSTALL - PRESS PLAY
1 Connect the system to the power supply,
"AUTO INSTALL - PRESS PLAY"
appears.
OR
In Eco Power standby/standby mode,
press and hold ÉÅ on the front panel until
"AUTO INSTALL - PRESS PLAY"
appears.
2 Press ÉÅ on the front panel to start
installation.
"INSTALL TUNER" appears.
All previously stored radio stations will be
replaced.
Once completed, the last tuned radio
station will play.
Tuner Operations