Filter
Top Products
12
English
Step 6: Connecting TV
IMPORTANT!
– You only need to make one video
connection from the following
options, depending on the
capabilities of your TV system.
– Connect the DVD system directly
to the TV.
– Scart Video connection provides
higher picture quality and S-Video
connection provides better picture
quality. These options must be
available on your TV.
– If both Scart Video and S-Video
connections are used to connect to
your TV, the video signal will
automatically switch to S-Video
when you power up the DVD
system. To set the VIDEO
OUT(put) to ‘Scart’, see page 30.
P-SCAN
ON OFF
AUDIO
OUT
S-VIDEO
IN
VIDEO IN
SCART IN
AUDIO
OUT
S-VIDEO
IN
VIDEO IN
SCART IN
DIGITAL
OUT
DIGITAL
IN
AUX
IN
TV
IN
LINE
OUT
AUDIO
VIDEO
OUT
CVBS
S-VIDEO
FM ANTENNA
MW
L
R
~ AC MAINS
SPEAKER SYSTEMS (8Ω)
SURROUNDCENTER FRONT
L
R
SL
SR
C
SUB-WOOFER
SCART OUT
Pb
Connections
Using Scart jack
● Use the scart video cable (black) to connect
the DVD system’s SCART jack to the
corresponding Scart input jacks on the TV.
OR
Using Composite Video jack (CVBS)
● Use the composite video cable (yellow - not
supplied) to connect the DVD system’s CVBS
jack to the video input jack (or labelled as
A/V In, Video In, Composite or Baseband) on
the TV.
OR
Using S-Video jack
● Use the S-video cable (not supplied) to
connect the DVD system’s S-VIDEO OUT
jack to the S-Video input jack (or labelled as
Y/C or S-VHS) on the TV.
OR
OR