Filter
Top Products
31
English
DVD Menu Options
Setting the digital output
Set Digital Output according to your optional
audio equipment connections.
Follow the steps of “Using the Setup Menu”
and select :
> Digital Output
Off
All
PCM only
Set Digital Output
Digital Output
Analog Output
Night mode
Speakers
Speaker Layout
PCM Output
Off
Select this to deactivate the digital output.
All
Select this if you have connected the digital
output to an optional piece of audio
equipment that has a multichannel decoder.
PCM only
Select this if the optional audio equipment is
not capable of decoding multichannel audio.
After that, proceed to “Setting the PCM
output”. Once you select ‘PCM only’. the
surround mode will automatically change to
‘STEREO’.
Setting the PCM output
Set your PCM (Pulse Code Modulation)
output only after you have set the system’s
Digital Output to ‘PCM only’. (See “Setting the
digital output”).
Follow the steps of “Using the Setup Menu”
and select :
> PCM Output
48 kHz
96 kHz
Set PCM output to 48K or 96K
Digital Output
Analog Output
Night mode
Speakers
Speaker Layout
PCM Output
48 kHz
Select this if the optional audio equipment is
incapable of processing 96 kHz digital signal
input. The signal will then be converted to a
standard signal with sampling rates of 48 kHz.
96 kHz
Select this if the optional audio equipment is
capable of processing digital signal input with
sampling rates of 96 kHz. However, if the
sound output is distorted or there is no sound,
select ‘48 kHz’ instead.