Philips MX5700D Home Theater System User Manual


 
19
English
Step 3: Setting the TV
IMPORTANT!
Make sure you have completed all the
necessary connections. (See page 12
Connecting TV).
1 Adjust SOURCE control until “DISC X
appears on the display panel (or press
DISC/MEDIA on the remote).
2 Turn on the TV and set to the correct video-in
channel. You should see the blue Philips DVD
background screen on the TV.
Usually this channel is between the lowest
and highest channels and may be called
FRONT, A/V IN, or VIDEO. See your TV manual
for more details.
Or, you may go to channel 1 on your TV,
then press the Channel down button
repeatedly until you see the Video In channel.
Or, the TV remote control may have a
button or switch that chooses different video
modes.
Changing the NTSC/PAL setting via
the remote control
TV/AV
DISC/
MEDIA
TUNER
AUX/DI
456
123
1 2
,
1 Press DISC/MEDIA on the remote to enter
disc mode.
Make sure no MP3 or picture (Kodak, JPEG)
disc is in disc tray 1.
Wait until the system finishes reading the
discs before proceeding to next step.
If playback begins, press Ç to stop playback.
2 Press and hold DISC/MEDIA on the remote
until “PAL” or “NTSC” appears on the display
panel.
To change the setting, repeat step 2.
Selecting the colour system that
corresponds to your TV
This DVD system is compatible with both NTSC
and PAL. In order for a DVD to play on this
DVD system, the colour system of the DVD, the
TV and the DVD system should match.
1 In disc mode, stop playback and press
SYSTEM MENU.
2 Select icon and press 4.
3 Use the joystick (1 2 3 4) on the remote to
navigate in the menu.
Move to and press 2.
Move to ‘TV System’ and press 2.
Auto – Select this if the connected TV is
compatible with both NTSC and PAL (multi-
system). The output format will be in
accordance with the video signal of the disc.
NTSC – Select this if the connected TV is
NTSC system. It will change the video signal of
a PAL disc (VCD only) and output to NTSC
format.
PAL – Select this if the connected TV is PAL
system. It will change the video signal of an
NTSC disc and output to PAL format.
4 Select an item and press OK.
To remove the menu
Press SYSTEM MENU.
Auto
NTSC
PAL
Set TV system
TV Shape
TV System
Video Output
Screen Saver
DISC MENUSYSTEM MENU
SEATING ZOOM
PREV NEXT
STOP PLAY/PAUSE
OK
2 3
,
4
1
Getting Started
SETUP MENU