Filter
Top Products
4. The multiplexer is programmed through on-screen menus which include access to on-screen HELP information.
The menus will be displayed on Monitor A in the system.
5. To access the menu screens, press the ALT key followed by the MENU key .
6. The Main Menu (as shown below) displays two setup options: Quick Setup and Advanced Setup.
- Quick Setup will provide all the basic programming necessary for typical systems
- Choose Advanced Setup when configuration requires such functions as alarm, motion, etc.
To perform the Advanced Setup for customized system configurations, first select Advanced Setup from the
main menu; then program the Time/Date,Autoset, and VCR setups as described in the following paragraphs; and
then refer to Section 4 for additional programming instructions.
Each menu screen includes two lines at the bottom showing the options that can be selected. These options
are:
CHOOSE Press SELECT key
MORE Use direction keys
EXIT Press ZOOM key
HELP Press ALT key
DEFAULT Press FREEZE key
ENTER CHARACTER Use direction keys to scroll through characters
When the SELECT key is pressed, all programmed settings are saved into non-volatile memory.
NOTE: A complete listing of all menu trees is provided at the back of the manual in Appendix D.
7. For typical video multiplexer system operations, select the Quick Setup option from the Main Menu.
NOTE: The Quick Setup program includes: Time/Date,AutoSet, and VCR setup. Quick Setup guides you
through all of these steps. If for any reason you need further information, consult the built-in HELP feature by
pressing the ALT key .
LTC 2600 Series Section 2 Installation
QUICK SETUP
SETUP 1
>TIME/DATE
AUTOSET
VCR SETUP
Choose:SELECT More:V
Exit:ZOOM
MAIN MENU 1.00
SETUP 1
>QUICK SETUP
ADVANCED SETUP
Choose:SELECT More:V
Exit:ZOOM
13