Filter
Top Products
English
EN 39
Adjust settings
Audio setup
1 Press OPTIONS.
[ General Setup ] menu is displayed.
2 Press V to select [ Audio Setup ], then
press B.
3 Select an option, then press OK.
Audio Setup
Ambisound Setup
HDMI Audio
Night Mode
4 Select a setting, then press OK.
To return to the previous menu, press •
BACK.
To exit the menu, press •
OPTIONS.
[ Ambisound Setup ]
Change the Ambisound setup.
Options Descriptions
[ Setup
Guide ]
Select this if you want to
go through the complete
Ambisound settings.
[ Room
Acoustics ]
Select the type of walls
that surround your room.
[ Room
Placement ]
Select this unit placement
in the room.
[ Height ] Select the height at which
this unit is placed.
[ Listening
Position ]
Select the distance
between your listening
position and this unit.
Tips
See chapter ‘Get Started - Start Ambisound setup’ •
for detailed information.
[ HDMI Audio ]
When you connect this unit and TV with
HDMI cable, select the audio output
setting for this connection.
[ • On ] – the sound is output through
both your TV and this speaker system.
If the audio format on the disc is not
supported, it will be downmixed to
two-channel sound (linear-PCM).
[ Off ]• – disable audio output from
your TV. The sound is only output
through this speaker system.
[ Night Mode ]
Make loud sound level softer and soft
sound level louder so that you can watch
the DVD movies at a low volume, without
disturbing others.
[ On ]• – for quiet viewing at night
(DVDs only).
[ • Off ] – enjoy surround sound with a
full dynamic range.
1_hts8141_98_eng 4_final_with dock.indd 39 7/30/2009 4:44:57 PM