Filter
Top Products
English
EN 21
Get started
Turn on Progressive Scan
If you connect this unit to TV with the
component video connection (see chapter
‘Connect video cables - Option 2: Connect to
component video jack’ for details), you can turn
on the progressive scan output if your TV
supports progressive scan.
1 Turn on the TV to the correct viewing
channel for this unit.
2 Press DISC MENU.
3 Press OPTIONS..
4 Press V to select [ Video Setup ] in the
menu, then press B.
On
Off
Picture Settings
Advanced Picture
TV Display
TV Type
Progressive
Video Setup
Closed Caption
5 Select [ Progressive ] > [ On ]
,
then press
OK.
A warning message is displayed.
6
To proceed, select [ OK ] in the menu
and press OK.
The progressive setup is complete.
Note
If a blank/distorted screen is displayed, wait for 15 •
seconds for the auto recover.
If no picture displayed, turn off the progressive scan •
mode as follows:
1) Press Z to open the disc compartment.
2) Press B.
3) Press SUBTITLE.
7 To exit the menu, press OPTIONS.
8 You can now turn on the progressive scan
mode on your TV (see the TV user
manual).
Note
There are some progressive scan TVs that are •
not fully compatible with this unit, resulting in an
unnatural picture when playing back a DVD VIDEO
disc in the progressive scan mode. In such case, turn
off the progressive scan feature on this unit and your
TV.
1_hts8141_98_eng 4_final_with dock.indd 21 7/30/2009 4:44:55 PM