Filter
Top Products
22
MCV250/21-1
English
2 Press CD orTUNER to select the desired
source.
● Before setting timer, make sure the music source
has been prepared.
CD – load the disc.
TUNER – tune to the desired radio station.
3 Press ALBUM-/+ 1/¡ (ALBUM 3/4 on
the remote) repeatedly to set the hour for the
timer to start.
4 Press TITLE-/+ í/ë (4 / ¢ on the
remote) repeatedly to set the minute for the
timer to start.
5 Press CLOCK•TIMER (TIMER on the
remote) to store the start time.
➜ remains on the display.
● At the preset time, the selected source will play.
To exit without storing the setting
● Press Çon the system.
Note:
– During timer setting, if no button is pressed
within 20 seconds, the system will exit timer setting
mode automatically.
Sleep timer setting
The sleep timer enables the system to switch off
by itself after a set period of time.
1 Press SLEEP on the remote control repeatedly
to select a preset time.
➜ The selections are as follows (time in
minutes):
OFF™ 15 ™ 30 ™ 45 ™ 60 ™ 90™120
➜ "SLEEP XX" or "SLEEP OFF" is displayed.
"XX" is the time in minutes.
2 When you reach the desired length of time, stop
pressing the SLEEP button.
To deactivate the sleep timer
● Press SLEEP repeatedly until "SLEEP OFF" is
displayed, or press the STANDBY ON y
button.
Note:
– will start flashing when the remaining
length of time after activation of the sleep timer is
less than 10 seconds.
Clock/Timer
pg001-pg025_FWV182_98-Eng 2006.1.4, 15:4622