Philips FWV182 Stereo System User Manual


 
15
MCV250/21-1
English
CD/VCD/MP3-CD Operation
You can also press STOP 9 to cancel your play
mode.
Text display and ID3 Text
In CD mode
Press DISPLAY (OSD) repeatedly to see the
following information on the display panel.
Elapsed play time of current track.
Remaining play time of current track.
Total remaining play time.
In MP3-CD mode
This feature is used to display the ID3
information for MP3-CD.
Press DISPLAY (OSD) repeatedly to display
the ID3 Text (if available) on the TV screen.
Programming the disc tracks
Programming tracks is possible when playback is
stopped. Up to 20 tracks can be stored in the
memory in any order.
1 In the disc mode and when disc playback is
stopped, press PROGRAM (PROG on the
remote) to start programming.
For VCD/CD, PROG flashes.
For MP3-CD, an album and title numbers are
shown and PROG flashes.
2 Press TITLE-/+ í/ë (4 / ¢ on the
remote) repeatedly (or use the Numeric
Keypad (0-9) on the remote control) to select
the desired track.
For MP3-CD, press ALBUM-/+ 1/¡
(ALBUM 3/4 on the remote) and TITLE-/+
í/ë (4 / ¢ on the remote) repeatedly
(or use the Numeric Keypad (0-9) on the
remote control) to select the desired Album and
Title for programming.
3 Press PROGRAM (PROG on the remote) to
store the track.
Repeat steps 1–3 to store other tracks.
4 Press ÉÅ to start programme playback.
To end programming without starting playback,
press Ç once.
Notes:
–Programme cannot be used for VCDs when PBC
is switched on. Switch off PBC before storing tracks.
If you attempt to programme more than 20
tracks, "FULL" will be displayed.
To review the programme
Stop playback and press TITLE-/+ í/ë
(4 / ¢ on the remote) repeatedly.
To exit review mode, press Ç.
Erasing the program
You can erase the program by:
pressing 9 twice during playback;
opening the CD compartment;
change to other source.
Playing a mixed mode disc
This set can play a mixed mode disc.
mixture of audio CD and MP3-CD
mixture of other combination may not be
operated normally.
1 As default, audio CD tracks will be read first.
2 Press MIX/SEL on the remote control
repeatedly to select other disc modes.
MP3-CD:
MP3 is displayed.
On the TV screen, an MP3 menu is displayed.
Note :
For protected CDs, “MIX CD-DA” is displayed on
your TV screen even if the disc does not have other
format. The MIX/SEL normal functions are not
available for protected CDs.
pg001-pg025_FWV182_98-Eng 2006.1.4, 15:4615