Philips FWV182 Stereo System User Manual


 
18
MCV250/21-1
English
Microphone Mixing
Connect microphones (not supplied) to the
system to sing along with the music source.
1 Connect microphones to MIC jack.
Before connecting the microphone, set the
microphone MIC VOLUME to the minimum
level to prevent howling sound.
2 Select VCD/CD to start playback.
Press ECHO to select ECHO ON.
3 Adjust the volume level of the source with the
VOLUME control (or by pressing VOL +/- on
the remote).
4 Start singing or talking through the microphone.
5 Press KEY to select key tone if necessary.
Notes:
–Keep the microphones away from the speakers
to prevent howling.
Microphone mixing is only available in VCD
mode.
Vocal
This feature allows you to fade out the original
vocal from a karaoke VCD. This feature is used
together with Echo mode. You can also use it to
select the different audio modes.
Pressing AUDIO/VOCAL on the remote
control repeatedly allows you to select the
following modes.
STEREO VOCALL-VOCAL R MONO
L MONO R STEREO
VOCAL LEFT/RIGHT - fade out the original
vocal for specially recorded karaoke discs only
(press ECHO to select MIC ON)
STEREO – same effect as the original recorded
disc.
MONO L/R – select the language on a bilingual
VCD.
Ensure that the MIC mode is switched on
when pressing VOCAL to fade out the original
vocal during STEREO VOCAL L/R mode.
VIDEO CD
Key Control
This feature allows you to change the key tone
of your vocal range.
Press KEY on the remote control.
"-KEY SHIFT+" appears on the TV screen.
Press VOLUME –/+ to decrease or increase the
vocal key level between -6 and +6.
Echo
This feature allows you to add echo while singing
or talking through a microphone.
Press ECHO on the remote control.
Press VOLUME –/+ to decrease or increase
the echo level.
pg001-pg025_FWV182_98-Eng 2006.1.4, 15:4618