Filter
Top Products
30
(3) Battery Status Indicator: Indicates the power on and battery condition. (a) When
the power switch is turned on, the indicator will flash briefly, indicating normal
operational status. (b) When the indicator remains illuminated the battery level
is low and must be replaced for continued operation.
(4) Transmitting Antenna: 1/4" Wave-transmitting antenna.
(5) Transmitter Housing: Houses electronics and battery compartment.
(6) Display: Indicates function information such as Error, Group ID, Channel ID,
Battery Status and Power Off.
(7) CCS Signal Receptor: Houses CCS receiving unit that reads information
transmitted to the unit by the receiver unit to set up desired frequency for use.
(8) Gain Control: Allows for the adjustment of various gain settings needed for
different applications.
(9) GT/MT Level Switch: Switch to the "GT" position for usage with the guitar, bass
guitar or "Line In." The Gain Control does not operate with the switch in the
“GT” position. Select the "MI" position when using the lavalier or headset. Then
use the Gain Control function to adjust the amount of gain necessary for the
input sensitivity.
(10) Battery Compartment and Adjustment Control Panel Cover: This cover conceals
both the battery compartment, which is designed to accommodate two 1.5
Volt (AA) batteries, and the adjustment control panel where the CCS Signal
Receptor (7), GT/MT (8) and Gain level control switch (9) are located. To gain
access to these, press the snaplocks on both sides of the cover (see Fig. 1)
and lift the cover up in a hinging motion.