Filter
Top Products
22
CCS: Enables the user to change channels on the transmitter by
simply pressing a button
Selecting/Operating CCS :
Once the Group and Channel have been established on the receiver, the
information must be transferred to the transmitter.
With the transmitter switched to the ON position, arrange it so that the rear of
the handheld transmitter or the face of the belt pack transmitter are facing the
receiver as illustrated in Fig. 9. Move the transmitter within the distance of 1'. Press
and release the "CCS" button. This will transmit the information from the receiver
to the transmitter. While you perform this operation, "CCS" will be indicated in the
Display. Once the information is transferred, the "RF" and "AF" meters should
respond accordingly to the signal strengths and the previous function information
should return to the display.