Filter
Top Products
Operations Manual, HPA3, Mini Compact Outdoor SSPA 208143 REV - 39
• General Settings Window: Displays the SSPA Redundancy and BUC/Amplifier
Settings. See Figure 3-20 for descriptions of the contents of the General Settings
window.
• Adjust Redundancy settings;
• Mute/Unmute amplifier;
• Adjust Attenuation;
• Change Network Address;
Note: The Compact Outdoor SSPA initially starts up in the Muted state;
Change the Mute Setting in the General Settings tab to enable Transmit
RF.
Figure 3-20: General Settings window descriptions
Select Mute State:
Muted or Unmuted.
Select BUC Source
Reference: Internal,
External, Auto.
Select Network
Address; Click
‘Change’ to set.
Select Attenuation;
Click ‘Change’ to set.
Select Single
or Redundant Mode.
Select HPA1
or HPA2.
Select Startup State:
Online or Standby.
Select Standby
Mode: Hot or Cold
Standby.